Gtx 680 classified fit in haf 912?

[mach13]

can evga gtx 680 classified fit in Cooler master HAF 912??

 

[clutchc]

If you remove the middle drive cage, it will fit. The card is 11" long. With the cage in place you only have 10.6"
http://www.coolermaster-usa.com/landing/haf912/home.php?page=specs

I had to remove the cage for my 2 570s.

 

[mach13]

If you remove the middle drive cage, it will fit. The card is 11" long. With the cage in place you only have 10.6"
http://www.coolermaster-usa.com/landing/haf912/home.php?page=specs

I had to remove the cage for my 2 570s.

thank you bro how about the height of evga gtx 680 classified? it will fit? with side panel together with 120mm fan? sorry for my english

 

[mach13]

If you didn't yet purchase the 680 classified, then don't. It's not worth the cash because you can't really overvolt it.

As to your question, clutchc is correct - you will most likely have to remove the cage.

can you give me a suggest. i want gtx 680 4gb memory with good temparature..

 

[clutchc]

thank you bro how about the height of evga gtx 680 classified? it will fit? with side panel together with 120mm fan? sorry for my english

There's plenty of room for the slightly extra heigth of that card in the HAF 912 case. Even with a side fan. I have a 140mm side fan and there is still lots of room to my 570s. The HAF 912 is a fairly wide case. It has an extra expansion slot positioned above and at 90 degrees to the normal expansion slots. If you plan on using that slot for an add-in device, the fan and card could be an issue. But the card will be fine with nothing in that extra slot. If you were to add a 2nd 680, the SLI Bridge may be close to the fan, but shouldn't be a problem.