Konica Minolta 7d firmware upgrade problem

Archived from groups: rec.photo.digital.slr-systems (More info?)

Lew Dickie via PhotoKB.com wrote:

> After installing upgrade to ver. 1.10e(which was not a problem) the camera
> will start up but when I tried to access the menu all that happens is that
> it displays system error and locks up.
> Can anyone offer suggestions on how to fix this.

Ouch.

0) Did you unplug the USB cable after the upgrade?

1) Visit the konicaminolta.com website and look at the FAQ's, support,
etc. pages.

2) Remove the battery for a few hours and try again.

3) Take it back to the store for service.

Good luck.

--
-- r.p.e.35mm user resource: http://www.aliasimages.com/rpe35mmur.htm
-- r.p.d.slr-systems: http://www.aliasimages.com/rpdslrsysur.htm
-- slr-systems FAQ project: http://tinyurl.com/6m9aw
-- [SI] gallery & rulz: http://www.pbase.com/shootin
-- e-meil: Remove FreeLunch.