Sign in with
Sign up | Sign in
Your question

Crossfire Connector Damage

Tags:
  • Graphics Cards
  • GPUs
  • Crossfire
  • Graphics
Last response: in Graphics & Displays
Share
a b U Graphics card
October 9, 2012 8:28:16 AM

Hi,

Just wondering if the Crossfire connectors on a GPU are likely to not be functional if two of the little gold pins on them have a 1mm chip out of the tip on them? As in, the full length of them are there but the gold has come away. Asking since I'm sending a card back for a seperate issue and don't know if I should bother to list it, I can remember seeing the damage a short time after unboxing it and I but I didn't throw it around installing it, I'm pretty sure it was already there but not 100%.

Thanks

More about : crossfire connector damage

a b U Graphics card
October 9, 2012 9:27:10 AM

Generally not since the contacts are making contact with the PCB at the back end of the strip.
That means the contacts in the CF Bridge are about 2 mm from the outer rim of the bridge plug making them come in contact with the back end of the CF fingers present on the GPU.
a b U Graphics card
October 9, 2012 9:39:52 AM

Thanks.
!