spacecowboy1

Honorable
Oct 16, 2012
5
0
10,510
Hi Guys

Im building a PC/Server and im wanting to use a PICOPSU. The problem i have is i havent a clue what type to get (wattage etc) these are the components i'm hopefully going to use.

Motherboard

Asus E45M1-M Pro
http://www.cclonline.com/product/66946/90-MIBHG0-G0EAY0DZ/Motherboards/Asus-E45M1-M-PRO-Hudson-M1-Motherboard/MBD0225/

Hard Drives

Western Digital Caviar Green 2TB SATA 6 Gb/s 64MB 3.5 inch Hard Drive WD20EARX
http://www.cclonline.com/product/59287/WD20EARX/Hard-Drives/Western-Digital-Caviar-Green-2TB-SATA-6-Gb/s-64MB-3-5-inch-Hard-Drive/HDD0644/

Memory

Kingston HyperX 8gb Memory (2x4) 1866MHx DDR3
http://www.cclonline.com/product/96737/KHX18C9T2K2/8X/Desktop-Memory/Kingston-HyperX-8GB-2x4GB-Memory-Module-1866MHz-DDR3-Non-ECC-CL9-240-pin-DIMM-XMP-Predator-Series/RAM0775/

I think thats the major parts but like i say i havent a clue what i need to power this thing.....any advise would be greatly appreciated.

 

spacecowboy1

Honorable
Oct 16, 2012
5
0
10,510
Sorry forgot to mention....the board and drives will be mounted on two tiers of Perspex sheet....I know this may seem mad because of all the obvious(dust,static etc) but were I'm locating this build I shouldn't have any problem