Archived from groups: rec.photo.digital.slr-systems (More info?)
Don't forget that when you update the firmware it's a two step process.
First you do the A, then you repeat the procedure for B. Just follow the
direction at Nikon's site.
Good luck. Now all I need is a cable release and a larger LCD.
Archived from groups: rec.photo.digital.slr-systems (More info?)
Sheldon wrote:
> Don't forget that when you update the firmware it's a two step process.
> First you do the A, then you repeat the procedure for B. Just follow the
> direction at Nikon's site.
>
> Good luck. Now all I need is a cable release and a larger LCD.
>
> Sheldon
>
>
Yay.. that was easy.
No problems at all.
My counter now says 88 RAW shots remain on a 512mb card. :-)
The new menu colours do look like they will be much easier to read in
bright light with the plastic cap on. :-)
Archived from groups: rec.photo.digital.slr-systems (More info?)
On Mon, 16 May 2005 12:49:25 -0600, "Sheldon" <sheldon@XXXXXXXXsopris.net>
wrote:
>Don't forget that when you update the firmware it's a two step process.
>First you do the A, then you repeat the procedure for B. Just follow the
>direction at Nikon's site.
>
>Good luck. Now all I need is a cable release and a larger LCD.
>
>Sheldon
>
Sheldon - forget the cable release - get the IR remote, under $30 and works
great! Just point at the camera and shoot shoot shoot!
Archived from groups: rec.photo.digital.slr-systems (More info?)
On Mon, 16 May 2005 20:56:38 -0400, in rec.photo.digital.slr-systems Bob
<FlintsTone@nospam.com> wrote:
>Sheldon - forget the cable release - get the IR remote, under $30 and works
>great! Just point at the camera and shoot shoot shoot!
More like less then $20 from a reputable vendor.
----------
Ed Ruf Lifetime AMA# 344007 (Usenet@EdwardG.Ruf.com)
See images taken with my CP-990/5700 & D70 at
http://edwardgruf.com/Digital_Phot [...] index.html
Archived from groups: rec.photo.digital.slr-systems (More info?)
I went to the Nikon site and looked for the update...not found. Do you have
a link?
Thank you
"Sheldon" <sheldon@XXXXXXXXsopris.net> wrote in message
newsrCdnQkjTuF_dhXfRVn-2g@comcast.com...
> Don't forget that when you update the firmware it's a two step process.
> First you do the A, then you repeat the procedure for B. Just follow the
> direction at Nikon's site.
>
> Good luck. Now all I need is a cable release and a larger LCD.
>
> Sheldon
>
Archived from groups: rec.photo.digital.slr-systems (More info?)
"MrB" <brooksro@hotmail.com> wrote in message
newsO-dnQkp0shL1RTfRVn-iA@adelphia.com...
>I went to the Nikon site and looked for the update...not found. Do you have
>a link?
>
> Thank you
Archived from groups: rec.photo.digital.slr-systems (More info?)
"Bob" <FlintsTone@nospam.com> wrote in message
news:47gi81pht0r7ojnabqgku1f59m5pnetb9u@4ax.com...
> On Mon, 16 May 2005 12:49:25 -0600, "Sheldon" <sheldon@XXXXXXXXsopris.net>
> wrote:
>
>>Don't forget that when you update the firmware it's a two step process.
>>First you do the A, then you repeat the procedure for B. Just follow the
>>direction at Nikon's site.
>>
>>Good luck. Now all I need is a cable release and a larger LCD.
>>
>>Sheldon
>>
>
> Sheldon - forget the cable release - get the IR remote, under $30 and
> works
> great! Just point at the camera and shoot shoot shoot!
Archived from groups: rec.photo.digital.slr-systems (More info?)
Thanks for the link. Got the update, and updated firmware successfully.
"Sheldon" <sheldon@XXXXXXXXsopris.net> wrote in message
newsrCdnQ4bbbaUxRTfRVn-qg@comcast.com...
>
> "MrB" <brooksro@hotmail.com> wrote in message
> newsO-dnQkp0shL1RTfRVn-iA@adelphia.com...
>>I went to the Nikon site and looked for the update...not found. Do you
>>have a link?
>>
>> Thank you
>
> http://support.nikontech.com/cgi-b [...] _topview=1 >
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.