how to check?

Check the Bios. Note: CL2 is CAS 2.

Or if you have the numbers off the chips post them here and we will find out for you.

<b>All for one and one for all...and 3 for 5! - Curly - The Three Stooges</b>  

You can set it to CAS 2 in the BIOS, if it doesn't run stable set it back to CAS 2.5.

My case has so many fans that it hovers above the ground   .

2.5 for DDR. 3 for SDR

<b><font color=blue>~scribble~</font color=blue></b> :wink: <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>

DDR-SDRAM has 2, 2.5 and 3.
SDRRAM has just 2 and 3 (and 4, if you count old systems).

<font color=orange>Quarter</font color=orange> <font color=blue>Pounder</font color=blue> <font color=orange>Inside</font color=orange>

Hmmm. I was actually refering to the setting for stability. Righter than right you are. :wink:

<b><font color=blue>~scribble~</font color=blue></b> :wink: <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>

hmm, if the ram supports CL2 then it would be equally stable as running at CL3.

AMD technology + Intel technology = Intel/AMD Pentathlon IV; the <b>ULTIMATE</b> PC processor

But if the RAM isn't CAS 2, and the BIOS are set to CAS 2, then it won't be stable. :tongue:

<b><font color=blue>~scribble~</font color=blue></b> :wink: <A HREF="http://www.ud.com/home.htm" target="_new">Help cure cancer.</A>