So, I built this pc about 6 months ago. Have a Hyper 212 EVO and the fan is making a pretty annoying rattling type noise. I guess I am kind of assuming it's the bearing in the fan.
It doesn't make the noise if the fan is off the cooler or if I hold my finger on the center part of the fan and slow the rpm's down some.
I have taken it off and tried messing with it a bunch and nothing seems loose. It has the rubber grommets between the heatsink and fan.
I set the bios to auto fan speed and it helped for a little until the pc was running for a little. (Assuming it cranked the rpm's up)
I guess I am going to just replace it since it's so cheap, unless some has some other suggestion?
My question at that point would be:
Would any 120mm fan work? Like on newegg they list the fan's that I saw as "case fan". My mobo has a 4 pin connector on it for the cpu fan, and if I remember correctly, the 4th pin is for variable speed? (could be wrong about that).
Any help is appreciated
Thanks
It doesn't make the noise if the fan is off the cooler or if I hold my finger on the center part of the fan and slow the rpm's down some.
I have taken it off and tried messing with it a bunch and nothing seems loose. It has the rubber grommets between the heatsink and fan.
I set the bios to auto fan speed and it helped for a little until the pc was running for a little. (Assuming it cranked the rpm's up)
I guess I am going to just replace it since it's so cheap, unless some has some other suggestion?
My question at that point would be:
Would any 120mm fan work? Like on newegg they list the fan's that I saw as "case fan". My mobo has a 4 pin connector on it for the cpu fan, and if I remember correctly, the 4th pin is for variable speed? (could be wrong about that).
Any help is appreciated
Thanks
Facebook
Twitter
Instagram