Hello this is my first time building a pc from the ground up. I have before changed out parts and done minor repairs and I figured now would be a good time to try a build of my own. I got the parts already, assembled the pc per whatever instructions I could find, and powered it on. While it powered on, the led's lit up, fans turned on, the monitor still read no signal.
I made sure the monitor was on the correct input and all the internal connections are in line but no luck.
Power Supply:CORSAIR TX Series CMPSU-750TX 750W
SSD: hOCZ Vertex 2 OCZSSD3-2VTX90G 90gb internal
HD: Seagate Barracuda ST1000DM003 1TB intenral
Wifi: Rosewill RNX-N300X IEEE 802.11b/g, IEEE 802.11n Draft 2.0 PCI Wireless Adapter
Blue-Ray: ASUS Black 12X BD-R 2X BD-RE 16X
Processor: AMD FX-4170 Zambezi 4.2GHz (4.3GHz Turbo) Socket AM3+ 125W Quad-Core Desktop Processor
RAM: four G.SKILL Ripjaws Series 240 pin DDR3
Fans:XIGMATEK FCB (Fluid Circulative Bearing) Cooling System Crystal Series CLF-F1252 120mm Red LED Case Fan
I am really running out of ideas on what to do with this, I cannot see anything on my screen, and since neither the motherboard nor case have a built in speaker for bios I can't tell if the bios is running into a problem.
If someone could please help me I would really appriciate it.