Sign in with
Sign up | Sign in
Your question

NTSC to PAL

Last response: in Home Theatre Legacy
Share
Anonymous
September 14, 2004 8:35:56 AM

Archived from groups: alt.video.laserdisc (More info?)

I have a conversion problem.
My TV does'nt work with NTSC signals.
My laserdisc players (CLD-1850 and CLD-J420) can play PAL and NTSC discs.
Both players can also convert NTSC to PAL, but the output is still 60 Hz.
I get a picture but it is rolling over my screen.
So my TV does'nt work with PAL on 60Hz.
Is there any way to get an PAL 50 signal from a NTSC 60 signal.

Gerbrand
Holland

More about : ntsc pal

Anonymous
September 14, 2004 3:04:01 PM

Archived from groups: alt.video.laserdisc (More info?)

This may not be an answer that you want, but I have found that if you record a
laserdisc on to a DVD. That DVD will play on both PAL and NTSC TVs. I guess
that once the picture is digitized, it no longer matters.

>I have a conversion problem.
>My TV does'nt work with NTSC signals.
>My laserdisc players (CLD-1850 and CLD-J420) can play PAL and NTSC discs.
>Both players can also convert NTSC to PAL, but the output is still 60 Hz.
>I get a picture but it is rolling over my screen.
>So my TV does'nt work with PAL on 60Hz.
>Is there any way to get an PAL 50 signal from a NTSC 60 signal.
>
>Gerbrand
>Holland
Anonymous
September 16, 2004 3:11:33 AM

Archived from groups: alt.video.laserdisc (More info?)

"Integra" <gerry@dwan.tmfweb.nl> wrote in message
news:ci5lcl$9td$1@news2.tilbu1.nb.home.nl...
> My TV does'nt work with NTSC signals.
> ...
> I get a picture but it is rolling over my screen.
> So my TV does'nt work with PAL on 60Hz.
>
If your TV set has a V-Hold control, adjustment of this setting should
enable you to eliminate the rolling effect.
Anonymous
September 16, 2004 3:11:34 AM

Archived from groups: alt.video.laserdisc (More info?)

"Matthew" <114775.401@compuserve.invalid> schreef in bericht
news:ci981c$gm$1@ngspool-d02.news.aol.com...
> "Integra" <gerry@dwan.tmfweb.nl> wrote in message
> news:ci5lcl$9td$1@news2.tilbu1.nb.home.nl...
> > My TV does'nt work with NTSC signals.
> > ...
> > I get a picture but it is rolling over my screen.
> > So my TV does'nt work with PAL on 60Hz.
> >
> If your TV set has a V-Hold control, adjustment of this setting should
> enable you to eliminate the rolling effect.
>
>

If it has one, it's on the inside and it's going to be a problem if I want
to play a PAL50 disc, DVD, Tape or watch television.

Gerbrand
Holland
!