So this all started after I installed/uninstalled Black and White 2 pc game (my setup was perfectly working, I should have never installed that game
I have recently come across my video card not recognizing my dvi inputs. I have 3 Acer S201HL monitors (two w/ dvi and one with an active display port adapter for the mini display port) and it only now recognizes one at a time. Basically If I plug in one monitor in to the dvi slot and no other monitors plugged in it works (only one screen). However once I start to add monitors, one in the other dvi slot the screens go black and i get a "not connected wire" or "no signal" error flashing on the screen. I have the latest catalyst center installed (12.10). It reads the card just fine, however the "no signal" errors still come up upon adding multiple monitors still. I also noticed that in windows setting screen resolution the word "analog" is showing by my monitor description. This used to be never there. Windows device manages recognizes the card and says the driver is up to date.
I have tried many things (i have searched a lot on toms hardware): completely uninstalled/re-installed video graphics drivers (also tried Catalyst 12.11beta), completely removed the card and re-installed it on to the mobo, disabled my onboard graphics in the bios, as well as checked all psu cables are attached and snug. None have fixed the issue.
I had my setup working perfectly and now it doesn`t work. If anyone can help me out with any ideas I would really appreciate it. Thank you so much.