Sign in with
Sign up | Sign in
Your question

Help with 4 Beep Post

Last response: in Systems
Share
January 6, 2013 11:39:10 PM

I am using the i3-3220, Asrock z77 extreme 4 and crucial ballistix ram.

More about : beep post

a c 106 B Homebuilt system
January 6, 2013 11:42:11 PM

Does the machine boot?

With the Extreme4 there is an LED troublehooting display at the bottom of the board that will display a number that wil tell you what is wrong with the system.
m
0
l
Related resources
January 6, 2013 11:48:43 PM

have you installed the ram? missing ram was what it meant when I had this problem.
m
0
l
a c 106 B Homebuilt system
January 6, 2013 11:51:59 PM

Your lucky I have my Extreme4 manual literally on my desk, or id go tell you to look up the error.

"Memory not Installed"
Got it in one Goldsmith.
m
0
l
January 6, 2013 11:53:27 PM

When I push my ram in harder I get error d7 now
m
0
l
a c 106 B Homebuilt system
January 6, 2013 11:55:12 PM

"No console input devices found"
Plug in your mouse and keyboard, though that shouldn't prevent boot.
m
0
l
January 6, 2013 11:56:34 PM

don't force it. remove the ram and push in until you see or hear both sides pop into place.
m
0
l
January 6, 2013 11:59:05 PM

When ever I connected it to my monitor it put up my specs so I'm guessing that is a good thing?
m
0
l
a c 106 B Homebuilt system
January 7, 2013 12:04:37 AM

?

Are you refering to the motherboard splash screen? It should feature the engine-looking thing thats on the box. If you seeing that you'v gotten to POST.

Do you know how to build a computer? I can link to a few good tutorials if your unsure on how.
m
0
l
January 7, 2013 12:05:32 AM

jussman66 said:
When ever I connected it to my monitor it put up my specs so I'm guessing that is a good thing?


that's POST, it makes sure everything's working.
m
0
l
January 7, 2013 12:05:43 AM

No, It's my first build
m
0
l
January 7, 2013 2:27:59 AM

How do I mount the Extreme 4 since it has 7 mounting holes but the case has 9
m
0
l
a c 106 B Homebuilt system
January 7, 2013 7:08:53 AM

The board is slight smaller than ATX standard, so the far right mounting holes wont line up with the case. Just ignore them, its fine.
m
0
l
January 7, 2013 8:02:02 AM

But won't those mounting holes short out the board?
m
0
l
a c 106 B Homebuilt system
January 7, 2013 8:04:04 AM

Nope.
m
0
l
January 7, 2013 12:22:45 PM

manofchalk said:
The board is slight smaller than ATX standard, so the far right mounting holes wont line up with the case. Just ignore them, its fine.


solution: if you haven't made the purchase, get a different motherboard
m
0
l
!