Sign in with
Sign up | Sign in
Your question
Solved

[Help] I couldn't start it

Last response: in Systems
Share
January 9, 2013 4:19:03 AM

I just built my new desktop. But after I pressed the power button, the cpu fan and case fan ran for a few seconds and stopped. no alarm, no display on monitor.
who can tell me , what should I do?

More about : start

Best solution

January 9, 2013 4:30:31 AM
Share

That usually means that you did not connect the main power to the motheboard, and/or the CPU processor fan is also not connected.
January 9, 2013 4:33:59 AM

but the cpu fan span for a few seconds.
Related resources
January 9, 2013 4:40:25 AM

True, check the main power connector for the motherboard.
January 9, 2013 5:44:26 AM

I connected the ATX 24-pin power supply, I checked the connector , it is done firmly. and the beep speaker didn't make a noise.
January 9, 2013 6:47:53 AM

yes, I only connected the 24-pin and didn't connect the 8-pin cpu power supply.
issue solved. thanks
January 9, 2013 6:48:20 AM

Best answer selected by limyth.
!