Can not get my computer to operate after new build

i just got my computer put together and now when i try to install windows it says set up is loading files goes through everything and then when it says startup is opening windows it goes to a blue screen (eww) that says a problem has been detect and windows has shutdown to prevent damage to your computer.
if this is the first time you have seeen this stop error screen, restart your computer. if this screen appears again, follow these steps:
check for viruses on your computer. remove any newly installed hard drives or hard drive controllers. check your hard drive to make sure it is properly configured and terminated. tun CHKDSK/F to check for hard drive corruption, and then restart your computer. then tecnical information:
*** stop: 0x0000007b (0xf78d2524,0xc0000034,0x00000000, 0x00000000) this is a new build all new parts the hard drive is used but there should be nothing wrong with it as it was a working hard drive freshly formated.

other than that my computer is on and running i can get in my bios with no problems runs fine just issue with windows install. i would appreciate any help anyone can give thanks.

this is my computer the only thing not on my list there is my 80gb hd that im using its a sata drive but i guess that could be the problem? the computer does recognize the drive in bios.

PCPartPicker part list:
Price breakdown by merchant:

CPU: Intel Celeron G540 2.5GHz Dual-Core Processor ($45.00 @ Amazon)
CPU Cooler: Zalman CNPS9500 AT Ball Bearing CPU Cooler ($31.99 @ Newegg)
Motherboard: ASRock Z77 Extreme4 ATX LGA1155 Motherboard ($124.99 @ Microcenter)
Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600 Memory ($44.99 @ NCIX US)
Case: Rosewill REDBONE U3 ATX Mid Tower Case ($44.99 @ Newegg)
Power Supply: Thermaltake TR2 430W ATX12V Power Supply ($42.28 @ TigerDirect)
Optical Drive: Sony AD-7280S-0B DVD/CD Writer ($25.97 @ Newegg)
Keyboard: SteelSeries Zboard Wired Gaming Keyboard ($38.98 @ Newegg)
Total: $399.19
(Prices include shipping, taxes, and discounts when available.)
(Generated by PCPartPicker 2013-01-17 17:58 EST-0500)
5 answers Last reply
More about computer operate build
  1. ummmm honestly... can i just ask one question???

    your windows is pirated right....? :P

    try another copy.
  2. gussrtk said:
    ummmm honestly... can i just ask one question???

    your windows is pirated right....? :P

    try another copy.

    ok so i got a copy that says for compaq or hp computer i got it from my teacher who said it should work just fine. but obveously my computer is not a compaq computer as i built it myself. so its just a bad disk?
  3. ahhh... yeah see if he has another i guess...
  4. gussrtk said:
    ahhh... yeah see if he has another i guess...

    I got it figured out. I needed to change my hard drive setting to ide mode so it would recognize my harddrive. when i did that everything worked no problem but now i installed my sata drivers and i still cannot switch to sata mode or acih mode or whatever it is achi i cant remember what it is off the top of my head.
  5. Format your system, Go into the BIOS, there check that if the SATA controller is set to AHCI then change it to IDE mode, if it is at IDE from default, Continue installing windows. You will go fine with the installation.
    There is no need to install the drivers. Even me did so. This problem of blue screen mostly arises when installing windows XP.
Ask a new question

Read More

New Build Computer Hard Drives Systems