Can a run 3 HDD and the following things using a 450watt frontech smps Tags: Prebuilt Configuration Hard Drives Systems Last response: January 18, 2013 8:14 PM in Systems Share jayadratha January 18, 2013 2:22:21 PM I have following config: Core2Duo CPU 9500GT GPU 2 HDD 1 DVD Writer 2Chasis Fans runing with 4Pin power cords And I have a normal frontech smps 450watt. Here is the specification of the smps : https://dl.dropbox.com/u/62937817/mypsu1.jpg can i add one more HDD in this case?? Will it work properly after adding one more HDD in this config? More about : run hdd things 450watt frontech smps GhislainG January 18, 2013 3:24:31 PM It will work. m 0 l jayadratha January 18, 2013 3:36:59 PM GhislainG said:It will work. actually the smps i have it came with the cabinate. so you can understand it is low grade. so was worrying if it will work or smps will damage and if smps will damage then it will also damage components thats for sure. m 0 l Related resources Can I run GTX650 using my 450watt smps - Forum Run Windows 7 from HDD dock using USB 3.0 - Forum Can I run external HDD using USB 3 port? - Forum Can't find your answer ? Ask ! Get the answer GhislainG January 18, 2013 4:15:59 PM That risk obviously exists, but it does with or without an additional hard disk. You didn't specify which hard disk you'll add, but most draw less than 7W. m 0 l jayadratha January 18, 2013 8:14:10 PM GhislainG said:That risk obviously exists, but it does with or without an additional hard disk. You didn't specify which hard disk you'll add, but most draw less than 7W. I will add normal seagate or wd 2TB hdd. m 0 l Can't find your answer ? Ask ! Publish Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !