here are my specs
CPU - Amd Phenom II 4 965BE
Mobo - GigaByte GA-870A-UD3
Ram - 6 Gigs
GPU - AMD 6850 xfx
CPU Cooler - Hyper 212 Plus
i currently have my cpu at 3.917.73Mhz(200Mhz /19.5multiplier) as for voltage i went from 1.400v(stock) to 1.456v
previously i ran a prime95 test for about 3 hours on stock voltage and i didnt BSOD but one of the Workers on Prime 95 reported hardware failure, i read around and people said to up the voltage so i am currently running prime right now 2 hours in looking good so far, but im browsing looking at other stable builds, and i see people down clocking their Voltage to 1.3v stable at 3.9mhz?
should i have down clocked my voltage lower than stock? or did i do the right thing by increasing it?
Forgot to mention temps.
my first run with stock voltage under load it was 55 degrees, now with my current voltage 56-57 degrees
CPU - Amd Phenom II 4 965BE
Mobo - GigaByte GA-870A-UD3
Ram - 6 Gigs
GPU - AMD 6850 xfx
CPU Cooler - Hyper 212 Plus
i currently have my cpu at 3.917.73Mhz(200Mhz /19.5multiplier) as for voltage i went from 1.400v(stock) to 1.456v
previously i ran a prime95 test for about 3 hours on stock voltage and i didnt BSOD but one of the Workers on Prime 95 reported hardware failure, i read around and people said to up the voltage so i am currently running prime right now 2 hours in looking good so far, but im browsing looking at other stable builds, and i see people down clocking their Voltage to 1.3v stable at 3.9mhz?
should i have down clocked my voltage lower than stock? or did i do the right thing by increasing it?
Forgot to mention temps.
my first run with stock voltage under load it was 55 degrees, now with my current voltage 56-57 degrees