Sign in with
Sign up | Sign in
Your question

IN WIN GRONE Computer case

Last response: in Systems
January 28, 2013 1:37:43 PM

Can someone tell me how to hook up the wiring of the 2 front fans and the fan turbo switch to the motherboard or power supply?
February 18, 2013 10:32:41 AM

sharkbyte5150 said:

If you still have questions after looking at sections 5. and 7., come back.
It clearly shows which connectors to use and how to connect the fans, and fan turbo/silence switch.

Hello sharkbyte515c,
Thanks for your reply. I know how to hook the connectors to the motherboard and power supply.
It doesn't show how to connect the fans to each other and the turbo/silence switch.
I contacted Inwin for a wiring diagram and they said there wasn't one.
Sorry,my question wasn't worded right.
Thanks anyway!!
Related resources

Best solution

February 18, 2013 2:21:27 PM

I'm looking at section 5 "I/O wires installation" and it shows "fan speed controller header" which is for the fan turbo switch. It looks like the smaller end connects to the front cable and the other end has a molex connector for power supply.

Then section 7 "thermal solution system" is all about connecting and installing the case fans. The easiest way to figure it out is just look at every connector from the case that you don't know where it connects to and try to take pictures of that.
February 18, 2013 2:47:00 PM

Best answer selected by Designman.