Sign in with
Sign up | Sign in
Your question
Solved

Computer reboots after installing new Mobo/CPU/RAM

Last response: in Systems
Share
February 3, 2013 9:52:40 PM

I bought an ASRock H61M-DGS MicroATX mobo, Intel Pentium G860, and Pareema 2x2GB (4GB) 1333 DDR3 RAM. I installed all of the parts, but my computer would start up for about 10 seconds, then shut off. No video output or anything. I took out a stick of RAM out of port B, but I got the same error. Then, I tried removing the RAM from port A, and installing it in port B. My computer booted, I reinstalled Windows 7 x64, updated drivers, and updated the BIOS. I tried using both sticks of RAM again, but the computer still wouldn't boot. I tried the RAM in another computer, and it booted just fine. I'm not sure if there motherboard has a bad RAM slot or if there's some other problem.
February 4, 2013 9:38:45 PM

edit: misread what you said.

Does each stick work individually on port B?
m
0
l
February 5, 2013 12:40:23 PM

crewton said:
edit: misread what you said.

Does each stick work individually on port B?


Yes. I used some RAM from another desktop I have, and that RAM doesn't work in slot A either.
m
0
l
Related resources

Best solution

February 5, 2013 9:30:13 PM

I'd RMA the board. It does happen and there isn't anything you can do about it unless you want to live with only one RAM slot :( 
Share
February 6, 2013 3:52:02 AM

Best answer selected by XPEH.
m
0
l
!