Sign in with
Sign up | Sign in
Your question

Need help troubleshooting first build

Last response: in Systems
Share
February 9, 2013 3:04:27 PM

So here is my build:

Cpu: i5 3570k
Psu: seasonic x850
Ram: 8gb gskill sniper
Mb: asrock z77 extreme 4
Gpu: sapphire hd 7970

This is my firat build and i thought i had it under control but now im lost. Ive got everything hooked up as per the newegg how to build a computer video. But when i hit the power button on the motherboard nothing happens. I tried this build about a month ago and the same thing happened. That time i measured the output voltage on the psu amd got nothing. So i sent it back to newegg amd they said it was a valid complaint and sent me a new one.

Well tje same thing is happening again now and im at a loss for what to do. I find it hars to believe that newegg would send me another broken psu... especially since seasonic is supposed to be reliable. I guess ill find out when i find my meter. But until then, do you guys have any suggestions of what else could be going on here? I sont even know where to start ithink ive gotten in over my head

More about : troubleshooting build

February 9, 2013 3:23:15 PM

Have you checked the header wires from the case to the motherboard to be sure they are hooked up correctly.
m
0
l
June 8, 2013 1:44:19 PM

Hi,
Have you checked all your mobo power connnections for security and being fully home,
ie the large plug that may have aditional two pin plug with and the atx plug.
m
0
l
!