Problem in accessing the router's admin page

Hello,

I have a binatone wi-fi modem. Internet is working good from router but i am not able to connect to router admin page i.e 192.168.1.1 and not be able to change wi-fi password.

Thanks for your valuable replies
Dev
3 answers Last reply
More about problem accessing router admin page
  1. Verify that "192.168.1.1" is the correct address.

    Here are some typical addresses:

    3Com 192.168.1.1
    Apple 10.0.1.1
    Asus 192.168.1.1, 192.168.1.220
    Belkin 192.168.2.1, 10.1.1.1
    Buffalo 192.168.11.1
    Dell 192.168.1.1
    D-Link 192.168.0.1, 0.30, 0.50, 1.1, 10.1.1.1
    Linksys 192.168.0.1, 1.1
    Microsoft 192.168.2.1
    Motorola 192.168.10.1, 20.1, 30.1, 62.1, 100.1, 102.1, 1.254
    MSI 192.168.1.254
    Netgear 192.168.0.1, 0.227
    Senao 192.168.0.1
    SpeedTouch 10.0.0.138, 192.168.1.254
    Trendnet 192.168.0.1, 1.1, 2.1, 10.1,
    U.S. Robotics 192.168.1.1, 2.1, 123.254
    Zyxel 192.168.1.1, 2.1, 4.1, 10.1, 1.254, 10.0.0.2, 0.138

    Try 192.168.0.1

    Good luck!
  2. Here is my result for the command ipconfig/all


    Wireless LAN adapter Wireless Network Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Dell Wireless 1701 802.11b/g/n
    Physical Address. . . . . . . . . : CC-AF-78-A2-DA-25
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::64ae:aebd:c911:4e1e%14(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCPv6 IAID . . . . . . . . . . . : 365735800
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-16-1D-A8-A1-18-03-73-8E-18-8A

    DNS Servers . . . . . . . . . . . : 202.56.215.6
    202.56.230.6
    NetBIOS over Tcpip. . . . . . . . : Enabled


    My default gateway is 192.168.1.1 but can't access the admin page from this address. same with 192.168.0.1.
  3. How about using IPv4 Address. . . . . . . . . . . : 192.168.1.10(Preferred)

    Try using a different laptop with an Ethernet cable to connect to the wireless router, and then try to get into the router setup.

    Another option is to reset the router and start over.
Ask a new question

Read More

Connectivity Routers WiFi Modem Internet Wireless Networking