Sign in with
Sign up | Sign in
Your question

Need help with new build fan connection

Last response: in Systems
Share
February 11, 2013 9:18:54 PM

I got my parts in last week (unfortunately the PSU was DOA so I had to RMA it) When I was putting it together, I noticed the ASRock H77M mobo i bought did not have enough fan connectors for my case fans (I need 3).

I would like to find a cable or splitter which will allow me to connect these fans while maintaining decent cable management. I believe I could use a Molex to 3-pin adapter but I couldn't find one with 3 3-pin connectors.

If anyone has any cable recommendations for this, I'd greatly appreciate it.

MOBO: http://www.newegg.com/Product/Product.aspx?Item=N82E168...
PSU: http://www.newegg.com/Product/Product.aspx?Item=N82E168...

More about : build fan connection

February 11, 2013 9:57:49 PM

Your board has 5 fan connections
4 pin CPU
3 pin CPU
3 pin CHA Fan X2
3 Pin PSU

Can you provide addational information reguarding all fans case and CPU
m
0
l
February 11, 2013 10:04:53 PM

navalweaponsofficer said:
Your board has 5 fan connections
4 pin CPU
3 pin CPU
3 pin CHA Fan X2
3 Pin PSU

Can you provide addational information reguarding all fans case and CPU


Case is the NZXT Tempest 410 elite.

http://www.newegg.com/Product/Product.aspx?Item=N82E168...

Comes with 3 fans. The two CHA Fans on the top right are hard to reach with the fan cables provided, unless I go through the top of the case next to the CPU Fan, which I don't really want to do.
m
0
l
!