Distant Remote site. Two routers ( .x.1.1 & .x.1.5).

DennisL

Distinguished
Jan 30, 2012
2
0
18,510
Distant Remote site. Two routers ( .x.1.1 & .x.1.5). Two Internet connections. Both routers set with remote config ports (not 8080!). Each router passes the remote port of the other. One of the routers has a ping utility that will ping the LAN OK. I can not reach a router when it's WAN is down.
When one of the Internet connections is down I need to access LAN ports and that router (LAN side) thru/via the other router. Is there a url/command line/config to solve this problem?
 

DennisL

Distinguished
Jan 30, 2012
2
0
18,510


I am 2000+ miles from the 'remote location'. The routers are about 15 feet from each other in the same building and are on the same LAN (ie: 10.10.1.x). They operate as a primary and backup/alternate gateway. I need to access ports on the LAN to change the gateway config of various clients on the LAN. For example... connect to 10.10.1.30:12345 via the working router/WAN to change the gateway of the client at port 12345.