After a succesful on screen POST, screen wont respond
I recently built a new computer using a Galaxy GTX 570, an Antec 750 watt PSU, a gigabyte 990fxa-ud3 Mobo, and an amd fx 8350, along with 16 gigs of coasair ddr3 ram.
I set the whole thing up before installing my HDD and disk drive and i got a succesful on screen POST. After i installed the HDD and disk drive however, the screen does not respond when i turn on the computer.
Any suggestions?
I set the whole thing up before installing my HDD and disk drive and i got a succesful on screen POST. After i installed the HDD and disk drive however, the screen does not respond when i turn on the computer.
Any suggestions?
More about : succesful screen post screen wont respond
Related ressources:
- ForumSuccesful POST sata in IDE?
- ForumNo post beep after power on, black screen then power down
- ForumAcer aspire one AOD255, Wont POST after screen replacement
- ForumWindows 8 black screen after restart
- ForumLaptop wont complete post or boot at all after replacing lcd screen
- ForumNewly built computer won't respond ?
- ForumCyberpower PC won't post to bios, black screen only!
- ForumMy computer wont boot, it doesnt start,i only got a blank black screen
- ForumComputer won't post after freeze
- ForumPC wont POST - black screen
- Forum“Driver failed to respond , but has recovered” ATIKMDAG.SYS dual screen
- ForumGreen Screen , CMOS checksum bad, now no POST !
- ForumKeyboard and Mouse won't work at Vista login screen
- ForumBlack Screen After Bios
- ForumWindows 7 won't respond
- ForumWill a PCIe 3.0 card work in a PCIe x16 slot?
- ForumWoW runs worse after upgrades? HELP!
- ForumScreen flickering: code appears to screen
- ForumStrange Question, VGA Splitter & Extended Screen
- ForumCannot Get ACER 27" Monitor to Utilize Full Screen!
- More resources
Read discussions in other Graphics & Displays categories
!
