memory settings

[Guest]

i am using mushkin hi-perf DDR and its rated at CAS2 (2-2-2). i wanted to change some of the settings in the BIOS to see if i can squeeze better performance out of it. in my bios the settings are in this order: CAS, bank interleave, Trp, Tras, Trcd, queue depth, recovery rate, and command depth. which should i change? i already set the timing to manual and changed the CAS to 2..but i am not sure about the rest. thanx

 

[camieabz]

Not an expert here, but I think you mean the 2/2/2/5/7 or 2/2/2/7/9 stuff?

Rule of thumb...lower numbers are faster, but can be less stable.

<b><font color=blue>The Cisco Kid</font color=blue></b>

 

[Guest]

yea thats what i mean..i just dont know what order those numbers are in

 

[svol]

Set bank interleave to 4 for best performance.

My case has so many fans that it hovers above the ground .

 

[FatBurger]

What motherboard do you have?

<font color=orange>Quarter</font color=orange> <font color=blue>Pounder</font color=blue> <font color=orange>Inside</font color=orange>

 

[Guest]

i have a dragon+