DRIVER for Fujitsu LCD Monitor SCALEOVIEW L19W-9
Last response: in Graphics & Displays
Hi
does anyone know where I can find or use suitable driver for above ?
I have XP and 5450 card.
the best I can do is 1280x1024 .full screen
1400x1050 is out of frequency.
1440x900 is the best setting ,, but has a black margin down left side, so must be the driver .
Fujitsu website isn't showing driver download and this display is still selling .
does anyone know where I can find or use suitable driver for above ?
I have XP and 5450 card.
the best I can do is 1280x1024 .full screen
1400x1050 is out of frequency.
1440x900 is the best setting ,, but has a black margin down left side, so must be the driver .
Fujitsu website isn't showing driver download and this display is still selling .
More about : driver fujitsu lcd monitor scaleoview l19w
You don't ever need monitor drivers, are your video drivers installed properly?
http://monitors.tech-specs.com/fujitsu-siemens-scaleovi...
1400x900 is the max resolution of the monitor, so you're not going to get 1400x1050.
Trying 1400x900 then increasing the refresh rate in the advanced video properties.
http://monitors.tech-specs.com/fujitsu-siemens-scaleovi...
1400x900 is the max resolution of the monitor, so you're not going to get 1400x1050.
Trying 1400x900 then increasing the refresh rate in the advanced video properties.
getochkn said:
You don't ever need monitor drivers, are your video drivers installed properly?http://monitors.tech-specs.com/fujitsu-siemens-scaleovi...
1400x900 is the max resolution of the monitor, so you're not going to get 1400x1050.
Trying 1400x900 then increasing the refresh rate in the advanced video properties.
oops,, ok,, You mean the graphics card driver? yeah, should be installed, said it was on screen.
So, will this work better if it's connected to HDMI 32 inch TV ?
sorry, don't understand all the resolution and fps stuff .
blue_orpheus said:
just to say i did as you said.I've got full screen on 1400 x 900 and 75Hz now.
Is it all controlled from the graphic card setting box now, rather than control panel and display settings?
I got confused as the 2 don't seem to match.
Good stuff. Least you got it working. I'll take a best answer.
Related ressources:
- Forum1 down ? to go
- ForumResolution notifier?
- ForumGreen vertical stripes on a TFT display on certain colours
- ForumAudio driver realtek AC`97 doesn\'t work
- ForumMVA- Fujitsu Panel and quality of LCDtests@THG
- ForumHow to use windows dualview to add another monitor to a laptop
- Forum"display setting not supported" 6200 turbo and LCD
- ForumBIG PROBLEM monitor works on xp but not windows 7. just a blue screen
- ForumHelp deciding on an LCD for FPS gaming
- ForumGeneral Laptop Advice From An Old Pro.
- ForumNo direct X acceleration
- ForumHelp, monitor out of range in safe mode
- ForumWhich monitor should I get?
- ForumStock Trading Computer - 4 monitors
- ForumA8 3500m or core i5 2410QM for general use
- ForumDisplay problems
- ForumWill a PCIe 3.0 card work in a PCIe x16 slot?
- ForumMonitor for gaming & general use?
- ForumGTX 570 Monitor and TV
- ForumMonitor help.
- More resources
Read discussions in other Graphics & Displays categories
!
