Sign in with
Sign up | Sign in
Your question

I need to know what gpu nd psu my hp compaq 6005 pro sff can take

Last response: in Graphics & Displays
Share
December 31, 2012 9:24:09 AM

Hello, i have a hp compaq 6005 pro sff minitower and i wud like to upgrade my gpu nd psu. The problem is that i have no idea what psu nd gpu to take as i dnt no much bout pc's. I have an amd athlon ii b26 cpu which pushes out 3.2 ghz nd 2gig of ram my onboard graphics is ati radeon hd 4200 but dnt think thats gud enuf for modern games. My os is windows 7 32 bit, Can any1 help plz.
September 10, 2013 10:37:03 PM

Hi, where I can find the right PSU since I have already bought Visiontek HD4560 SFF?
m
0
l
September 11, 2013 11:33:00 PM

Have you tried installing and see if it works?
m
0
l
September 12, 2013 12:56:12 AM

I have.

I only see "cable not connected"

There's no power input slot to give it extra power if needed.
m
0
l
February 4, 2014 9:37:27 AM

I just bought an HP 6005 Pro SFF. From what I have looked up in the last few weeks the PSU is only 240 watts and the motherboard to PSU connection seems to be a 6 pin molex type connection. So I would think an ATI 7750 is not compatible. You would have to find something that would be compatible with a low power PSU. I've been searching for a higher wattage PSU that may be compatible with the board but have not found one yet.

Edit: I just found this .pdf file on the HP website that says a AMD HD 4550, HD 6350(512MB) and HD 7450 (1GB) are compatible with the SFF model. It also does have a few Nvidia models.

http://h18000.www1.hp.com/products/quickspecs/13412_na/...

The HP website says the HD 7450 is compatible with the HP 6005 Pro SFF.

http://www8.hp.com/us/en/products/oas/product-detail.ht...!tab=features

And newegg has it.

http://www.newegg.com/Product/Product.aspx?gclid=CJ-2ic...
m
0
l
February 7, 2014 11:17:13 PM

Unfortunately 25W is the maximum for SFF
1 each
2.5" low profile
6.6" length
25W max. power
The HD 7450 is really not meant for gaming but playing at 1280x720 should be ok with low settings.
m
0
l
!