Voice Coil Source / Supplier

Archived from groups: rec.audio.tech (More info?)

TC wrote:
> Hi,
>
> I am looking to rebuild a set of 3/4" soft dome tweeters (out of an
> old pair of Image100). I need a new voice coil and diaphragm. I
> beleive these are 8 ohm rated. Voice coil outer diameter is 13/16" of
> an inch. I hail out of Canada. Drop me a line if you know of a
> certain source for voice coils / diaphragms of this exact size. Thank
> you.

www.speakerbits.com.au

geoff

Archived from groups: rec.audio.tech (More info?)

Hello,

I dropped both companys - speakerbits & IMAGE - an email.

I'll have to see what they say on the matter. Thank you for your help. If
you wish to see a picture of these tweeters, I can post.


"TC" <freeman@DIESPAMDIEflashmail.com> wrote in message
news:vLZec.5509$K9.11869@news1.mts.net...
> Hi,
>
> I am looking to rebuild a set of 3/4" soft dome tweeters (out of an old
pair
> of Image100). I need a new voice coil and diaphragm. I beleive these are 8
> ohm rated. Voice coil outer diameter is 13/16" of an inch. I hail out of
> Canada. Drop me a line if you know of a certain source for voice coils /
> diaphragms of this exact size. Thank you.
>
>

Archived from groups: rec.audio.tech (More info?)

"TC" <freeman@DIESPAMDIEflashmail.com> wrote:
in rec.audio.tech<hokfc.145$AL1.229@news1.mts.net>,

: Hello,
:
: I dropped both companys - speakerbits & IMAGE - an email.
:
: I'll have to see what they say on the matter. Thank you for your help. If
: you wish to see a picture of these tweeters, I can post.

You can't post/attach a binary (picture) here, but you could post one to
alt.binaries.pictures.radio and note the fact here. Or put it on a web site.

But if you've removed? the tweeter in question surely you can see some
markings on the back which indicate manufacturer/model no. &etc.?

Many if not most speaker system manufacturers are using driver units
manufactured by other companies, so what's on the actual unit is crucial.

There will likely be many tweeters with similiar physical dimensions and yet
vastly different performance and measurement characteristics, so just
looking for a replacement based on size won't be very useful to you at all.

If you haven't removed it, I suggest you do so, and ascertain the details.

RdM

: "TC" <freeman@DIESPAMDIEflashmail.com> wrote in message
: news:vLZec.5509$K9.11869@news1.mts.net...
: > Hi,
: >
: > I am looking to rebuild a set of 3/4" soft dome tweeters (out of an old
: pair
: > of Image100). I need a new voice coil and diaphragm. I beleive these are 8
: > ohm rated. Voice coil outer diameter is 13/16" of an inch. I hail out of
: > Canada. Drop me a line if you know of a certain source for voice coils /
: > diaphragms of this exact size. Thank you.