Sign in with
Sign up | Sign in
Your question

Oil Cooled PC - *PLEASE* HELP ME!

Last response: in Systems
Share
February 24, 2013 1:32:14 AM

O.K. forgive me for being a little crazy, but I'm about to have a breakdown and go insane. I still can't seem to find the right PUMP, even after going through FOUR different ones!

*This is all I need* ---> Please give me some advice on which pump I should get for my mineral oil cooled PC, so I can pump mineral oil from the aquarium through two radiators then back into the aquarium. Please & Thank You!

PS: It's for a school project, and I've been wanting to do this for a long time. I fully understand that oil cooling is not very efficient in terms of $, cooling(compared to water), and time.

HELP!

More about : oil cooled

February 25, 2013 2:21:21 AM

These pumps won't do, for I had bought a PMP-450S before and it pushed oil out the other end like a sissy. It was very bad. The next pump I tried was overkill and heated the oil up. The one after that can't push oil properly without it creating air bubbles SOMEHOW inside of the propeller chamber. It clouds the oil up bad. I need help!
Related resources
February 27, 2013 2:36:57 AM

Does anyone have any clue somehow on this subject, I really need the appropriate pump for the job!
February 28, 2013 2:16:24 AM

Bump.
March 14, 2013 6:18:30 AM

Someone??
a c 105 B Homebuilt system
March 14, 2013 6:24:30 AM

First off, your in completely the wrong forum. You want to be in the water-cooling forum for this kind of question.
http://www.tomshardware.com/forum/29/water-cooling.html

From what I understand of oil cooling any typical water-cooling pump should be fine, though you would want a stronger one than usual due to oil being thicker. I'v seen some oil-cooled rigs running fine off DDC pumps, so I don't know why your D5 wouldn't work. Maybe have a look at the Koolance PMP-500, that has fairly strong head pressure.

Also may be of interest.
http://www.tomshardware.com/forum/276288-29-mineral-lin...
!