ASUS NVIDIA GeForce GTX 660 Ti

So I ran a benchmark just now, for some reason it's saying that my Core clock is only 705 Mhz and memory clock is 3004. Any ideas?
Heres my setup
Intel Core i7-3770 CPU x 1
Gigabyte B75M-D3H Motherboard x 1
Kingston DDR3 2X4GB 1600M CL9 x 1
Kingston 120GB V+200 SSD x 1
Seagate Barracuda 1TB Hard Drive x 1
LG GH24NS72 SATA 24X DVD-RW DRIVE BLACK x 1
Asus Video Card GTX660-TIDC2O x 1
Thermaltake Power Supply TR-600 TR2 600W 72% Efficiency 120mm Cooling Fan Retail x 1
Enermax Ostrog Case ECA3253
Windows 8 Pro x64 and here are my total results using 3DMark11 set on Performance
3DMark Score
P8430
Graphics Score
8565
Physics Score
9001
Combined Score
6953
3DMark Score
8430 3DMarks
Graphics Score
8565
Physics Score
9001
Combined Score
6953
Graphics Test 1
40.71 FPS
Graphics Test 2
39.46 FPS
Graphics Test 3
51.9 FPS
Graphics Test 4
26.15 FPS
Physics Test
28.58 FPS
Combined Test
32.34 FPS
8 answers Last reply
More about asus nvidia geforce
  1. Which benchmark were you running? It appears the card wasn't being stressed out enough to ramp up all the way. Run Furmark and watch the Core and Memory readings in the display while it runs one of its preset benchmarks.
  2. Ok, so i ran that program. Heres the info it gave me still doesn't seem right.
    SCORE:1919 points (31 FPS, 60000 ms)
    Max GPU Temp: 66°C
    Resolution: 1920x1080 (W) - AA:0 samples
    FPS: min:32, max:34, avg:31 - OPTIONS: DynBkg
    GeForce GTX 660 Ti/PCIe/SSE2 (10DE-1183)
    9.18.13.1090 (12-29-2012) - GL:nvoglv64
    GPU core: 1136 MHz, memory: 3004 MHz
    Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
    3400 MHz System Memory 8138 MB
    Windows 8 64-bit build 9200 [No Service Pack]
    Ran it again on Resolution: 1280x720 (FS) - AA:0 samples and got
    SCORE:2721 points (45 FPS, 60000 ms)
    Max GPU Temp: 65°C
    FPS: min:45, max:47, avg:45 - OPTIONS: DynBkg
    GeForce GTX 660 Ti/PCIe/SSE2 (10DE-1183)
    9.18.13.1090 (12-29-2012) - GL:nvoglv64
    GPU core: 1149 MHz, memory: 3004 MHz
    Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
    3400 MHz 8138 MB
  3. Yea there is no way your memory clock could ever be that high. Sounds like maybe an issue is causing your card to output an incorrect clock speed. Perhaps a driver issue?
  4. This is what my card is rated for, I just updated all drivers, bios is up to date, gpu firmware up to date...
    Core Clock
    967MHz

    Boost Clock
    1058MHz

    Effective Memory Clock
    6008MHz
  5. These cards throttle back when they hit their power limit, they will do so in furmark. also if they get too hot they throttle back. You can get msi afterburner and increase the power limit. use msi afterburner to log and record your temps, power useage, gpu useage and clock speed to check what is happening. If it hits 100% power limit it will throttle back. My card did that when it was set to stock, so i bumped up the power limit, and no more throttling. I even bios modded it to give me up to 150% power limit. different cards have different max pwer limits.
  6. The memory is correct. With DDR memory the speed is effectively doubled. So it depends on what the pgm is displaying. 3K memory speed is 6K effective.
  7. iam2thecrowe said:
    These cards throttle back when they hit their power limit, they will do so in furmark. also if they get too hot they throttle back. You can get msi afterburner and increase the power limit. use msi afterburner to log and record your temps, power useage, gpu useage and clock speed to check what is happening. If it hits 100% power limit it will throttle back. My card did that when it was set to stock, so i bumped up the power limit, and no more throttling. I even bios modded it to give me up to 150% power limit. different cards have different max pwer limits.


    I was watching power usage, it was steady at 109%, not sure how many watts that equates to, will have to check it out and c if i can raise it even higher. So basically right from the start my gpu could have been throttled
  8. Ok so according to detailed stats 225 watts is max. My GPU tweaker gives me the option to change min voltage (MV) but won't let me change max, I watched the MV rating while running the test and it tops out at 1175.
Ask a new question

Read More

Graphics Cards Graphics