Can\'t install Windows on my SSD/new build

[Whatarewe]

Ever since I bought this damn thing, I've had trouble. First it wasn't recognized, then it wouldn't format and now I've gotten to the point where I can partition, benchmark and write files to it, but I can't install windows 7 Ultimate on it. Booting from the disk, I get to the custom installation, highlight disk 0 part 1 (after system reserved) and click next. Copying windows files happens almost instantly, then expanding windows files gets stuck at 0% for a minute or two then hits 1% and an error message comes up that says something like "could not install windows because not all necessary files are available. "
I have installed a few times on an HDD with no problems.
I have an AMD Chipset(ASUS M5A97), SATA III 6 GB/s, AHCI is enabled and always has been.
Do I need a driver for my SSD?
I tried downloading an update for the installation as well (boot from HDD, running installation disk), which ended in the same result.
Any ideas?

 

[Outlander_04]

you are installing from a dvd ?

 

[camohanna]

SSD's dont need drivers. I would try formatting it again but make sure you are formatting it as NTFS not another one. You could also try to install it using a sata 2 port.

 

[Whatarewe]

Yes, I'm installing from a disk.

Disk Management says it is NTFS format

It's a SATA 3 device. A Samsung 840 Pro 128 GB

 

[Whatarewe]

Here are the rest of the specs:
-3-core MDX controller
-DDR 2.0 NAND Flash Memory
-LPDDR2 SDRAM Cache Memory
-AES 256-bit Encryption

 

[Outlander_04]

To get this clear you have another hdd in the computer already that you have used to format the SSD?

I'd try disconnecting ALL drives but the dvd you are using and the SSD , checking they are recognised by the BIOS , and that the dvd is first boot option

 

[Whatarewe]

Yes, I've done that quite a few times. Still nothing.