Sign in with
Sign up | Sign in
Your question

660ti SLI with Molex adapters

Last response: in Graphics & Displays
Share
January 22, 2013 6:57:02 PM

I want to run a SLI setup with two standard 660ti cards. I have a Corsair GS 700 that only comes with two PCI-E 6+2 connectors. I know the wattage of the PSU is enough, so can I just use one molex adapter and one 6 pin per card?
a c 172 U Graphics card
January 22, 2013 7:04:16 PM

Yes but keep in mind that some units have ocp and ovp built in so it might not work for high amp loads unless it has a single 12v rail.
a c 271 U Graphics card
January 22, 2013 9:42:32 PM

jrlk2005 said:
I want to run a SLI setup with two standard 660ti cards. I have a Corsair GS 700 that only comes with two PCI-E 6+2 connectors. I know the wattage of the PSU is enough, so can I just use one molex adapter and one 6 pin per card?

It's what I'm doing to run my 660Ti's and I have a Corsair HX620.
January 22, 2013 11:28:22 PM

I have the same PSU and I used one 6 pin/one molex per card. Works just fine.
!