Tom's Hardware > Forum > Audio > Audio Technology > Left speaker doesn't always work

Left speaker doesn't always work

Forum Audio : Audio Technology - Left speaker doesn't always work

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.tech (More info?)

 

I've got a 10 year old sony receiver connected to 2 home made speakers
and the left side speaker doesn't always work. Sometimes when i turn
the receiver on, there's no sound coming from that speaker, but if i
greatly increase the volume, it springs to life. I tried switching the
left and right speakers, but still experience the same problem.

The speakers have no internal electronics like crossovers, and i'm
wondering
if that's the main cause of the problem. They work fine with a 25 year
old 40watt Kenwood amp.

Thanks for any clues.

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.tech (More info?)

 

In article <ddfb8428.0407081050.1874b78a@posting.google.com>, Mark
Andrews <mta61@yahoo.com> wrote:

> I've got a 10 year old sony receiver connected to 2 home made speakers
> and the left side speaker doesn't always work. Sometimes when i turn
> the receiver on, there's no sound coming from that speaker, but if i
> greatly increase the volume, it springs to life. I tried switching the
> left and right speakers, but still experience the same problem.
>
> The speakers have no internal electronics like crossovers, and i'm
> wondering
> if that's the main cause of the problem. They work fine with a 25 year
> old 40watt Kenwood amp.

If you swap the left and right speakers, and the left one still
does not work, then it isn't a speaker problem. It could be wiring.
Try swapping the right and left speaker wire at the amp end. If
the problem swaps sides. But more than likely, you are losing one
of the amplifier channels. With a 10 year old amp, and moving the
volume control fixes it, I suspect that you have dirty controls.
Try cleaning the controls with a good spray control cleaner.

-john-

--
====================================================================
John A. Weeks III 952-432-2708 john@johnweeks.com
Newave Communications http://www.johnweeks.com
====================================================================

Reply to Anonymous

Archived from groups: rec.audio.tech (More info?)

 

You didn't mention the model number of the receiver. If there is a safety
relay, check that the contacts are not intermittent. I have had this with
many safety relays in various amplifiers. If this is not the fault, or your
receiver does not employ a safety relay, check for loose connections, dirty
switches or controls, or a cold solder connection. It is also possible that
there is a failing component that is going intermittent.

In most cases, I have had the safely relay go defective (where one was
used).

--

Jerry G. GLG Technologies GLG
==========================


"Mark Andrews" <mta61@yahoo.com> wrote in message
news:ddfb8428.0407081050.1874b78a@posting.google.com...
I've got a 10 year old sony receiver connected to 2 home made speakers
and the left side speaker doesn't always work. Sometimes when i turn
the receiver on, there's no sound coming from that speaker, but if i
greatly increase the volume, it springs to life. I tried switching the
left and right speakers, but still experience the same problem.

The speakers have no internal electronics like crossovers, and i'm
wondering
if that's the main cause of the problem. They work fine with a 25 year
old 40watt Kenwood amp.

Thanks for any clues.

Reply to Anonymous

Archived from groups: rec.audio.tech (More info?)

 

On 8 Jul 2004 11:50:34 -0700, mta61@yahoo.com (Mark Andrews) wrote:

>I've got a 10 year old sony receiver connected to 2 home made speakers
>and the left side speaker doesn't always work. Sometimes when i turn
>the receiver on, there's no sound coming from that speaker, but if i
>greatly increase the volume, it springs to life.

This sounds like dirty or oxided switches in the receiver, for
instance the input selector. Try flicking the switches back and forth
10-20 times and see if that clears it. If it does, you can fix it by
opening the box and cleaning the switches. The same is true for the
safety relay as another poster reported.

Per.

Reply to Anonymous
Tom's Hardware > Forum > Audio > Audio Technology > Left speaker doesn't always work
Go to:

There are 772 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them