Trouble with DVD playback on MSI HD 6450

I have my GPU's drivers all updated.

I'm using Dell CinePlayer and Windows Media Player, and whenever I go to play a DVD a green flash appears briefly, and then it works alright, but hardly any subtitles will work.

One DVD I tried did display subtitles actually, but they flicker constantly.
8 answers Last reply
More about trouble playback 6450
  1. try VLC or CCCP (it has MPC-HC bundled with it.)

    http://www.videolan.org/vlc/index.html

    http://www.cccp-project.net/
  2. I can't use CCCP because it says it won't work on anything below Windows XP SP3, I am using Windows XP SP2.

    Thing is, my DVD programs displayed subtitles fine before without CCCP

    I had a GeForce 7300 LE GPU before and that ran everything fine, it's just been since I upgraded to that MSI 6450....
  3. try VLC, it has its own internal codecs
  4. VLC was working but I am getting Microsoft C++ Runtime errors now.
  5. Mostly, this kinds of error can be caused by two factors:



    1.Runtime components of Visual C++ Libraries are missing.

    2.Software problem.



    If the issue is caused by #1, you can reinstall the Runtime components of Visual C++ Libraries to resolve the problem.



    Microsoft Visual C++ 2008 Redistributable Package (x86)

    http://www.microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en



    If the issue still persists after installing above package, the issue should be a software problem. I suggest you take a clean boot check whether it is a software conflict issue. If not, it is still recommended to address the problem with manufacturer support. Thank you for your understanding.



    For your convenience:



    Clean Boot

    =============================

    1. Click Start, type "MSCONFIG" (without the quotations) in the Search Bar and Press "Enter" to start the System Configuration Utility.

    2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).

    3. Click the "Startup" tab, click "Disable All" and click "OK".

    4. Restart the computer and test the issue.



    Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of "Don't show this message" and then click "OK".



    Please monitor the system in the Clean Boot environment. If the problem does not occur, it indicates that the problem is related to one application or service we have disabled. You may use the MSCONFIG tool again to re-enable the disabled item one by one to find out the culprit.
  6. You mean contact MSI right?
  7. no
  8. Okay I finally got the newest CCCP. Some subtitles work, others don't.

    Any certain way I should configure it?
Ask a new question

Read More

Radeon DVD Media Player Graphics