Problems with NAD 3130

Archived from groups: rec.audio.tech (More info?)

Hello, i have these settings:

Left 8 ohm, Right 8 ohm }Speakers
Left 4 ohm, Right 4 ohm }Speakers
NAD 3130
XBOX

When i have the volume at low sound it doesent come any sound to the
two right speakers.
Ofcourse i wonder why, and what can i do about it?

Greetings, Adam

Archived from groups: rec.audio.tech (More info?)

"Jerry G." <jerryg50@hotmail.com> wrote in message news:<cf44tb$j0d$1@news.eusc.inter.net>...
> This may be from a cold solder connection especially in the output stage. If
> your model uses a protection relay, the contacts may be going bad, or may be
> oxidized.
>
> Take care that the specs for your amp are rated for 4 ohms. Many of these
> amps are 8 ohm only, and the output stage will overheat when using 4 ohm
> speakers. Overheating the output stage, can lead to some very expensive
> problems to deal with.
>
> --
>
> Jerry G.
> ==========================
>
>
> "Alj" <sjogras@hotmail.com> wrote in message
> news:c461bfac.0408071022.548b896d@posting.google.com...
> Hello, i have these settings:
>
> Left 8 ohm, Right 8 ohm }Speakers
> Left 4 ohm, Right 4 ohm }Speakers
> NAD 3130
> XBOX
>
> When i have the volume at low sound it doesent come any sound to the
> two right speakers.
> Ofcourse i wonder why, and what can i do about it?
>
> Greetings, Adam

Okey, i will check that about oxidation, but are you sure that i may
ruin my amp if i use those settings?
The Amp has a switch that lets you choose betwen 8ohm and 4ohm, what
should i then use, i have as i said 2 8ohm speakers and 2 4ohm
speakers.