Sign in with
Sign up | Sign in
Your question
Solved

Graphics Card signal dies and come back to life

Last response: in Graphics & Displays
Share
February 5, 2013 12:44:34 AM

So i installed a GTX 550 ti In this system:

Core 2 Quad 6600
P45 Platinum MSI
DDR2 800 3 GB
600w Power Supply

And sometimes it sends video signal to the Monitor and sometimes don´t I DONT know what to do, the Graphics Card is plugged with the suplementary connector (2 Molex to 1 PCIE).

The Graphics Card is plugged also with a VGA to a 1080p Monitor is that the problem? Why the signal dissapears (although the computer works) while the screen enter in Stand By mode? What should i do?!

Please Help!

Best solution

a c 85 U Graphics card
a b C Monitor
February 5, 2013 1:11:17 AM

your psu got a 6 pins conector for the card i would use it and not the molex splitter,also check you video cable to the monitor if you could with another one. this card have dvi-i connector try this to your monitor .
Share
February 5, 2013 1:18:35 AM

scout_03 said:
your psu got a 6 pins conector for the card i would use it and not the molex splitter,also check you video cable to the monitor if you could with another one. this card have dvi-i connector try this to your monitor .


Okay ill try a DVI and a HDMI, will it work if i put the CD drivers?
m
0
l
Related resources
a c 85 U Graphics card
a b C Monitor
February 5, 2013 2:03:34 AM

if if is a brand new install use the cd but if you want the latest driver go to the nvidia link, stay around and see what other members tell you on that .
m
0
l
February 16, 2013 5:04:38 AM

Best answer selected by Theron550.
m
0
l
!