Router to router to router connection

[edongo]

Greetings,
i am trying to connect a router to router to another router. the setup is as follows


ROUTER A
zyxel p-660hw-t1
mode router
lan ip192.168.1.1
dhcp server on
wireless on
IP Pool Starting Address: 192.168.1.10

ROUTER B
zyxel p-660hw-t1
mode router
lan ip192.168.1.2
dhcp server off
wireless on

ROUTER C
zyxel p-660hw-t1
mode router
lan ip192.168.1.3
dhcp server off
wireless on


ADSL LINE TO ROUTER A connect 2 pc by rj45 and ROUTER B by rj45.
ROUTER B connect 1 pc by rj45.

this work fine.

my the problem is now i need to add ROUTER C to connect smart tv by rj45 and a bluray by rj45

new configuration


ADSL LINE TO ROUTER A connect 2 pc by rj45 and ROUTER B by rj45.
ROUTER B connect 1 pc by rj45 and ROUTER C by rj45.
ROUTER C connect smart tv by rj45 and a bluray by rj45

the network go down, no work more.

maybe you can help me with the right configuration.

thnx

 

[ngrego]

Have you set Gateway and DNS on Routers B and C to 192.168.1.1?
Otherwise it looks fine and should work.

If you have and it still doesn't work, try manually configuring network on TV and BR.

 

[edongo]

Have you set Gateway and DNS on Routers B and C to 192.168.1.1?
Otherwise it looks fine and should work.

If you have and it still doesn't work, try manually configuring network on TV and BR.

Thank you very much for the reply ngrego.
Well the problem is that when connect and turn on the ROUTER C, the indicator lights of the 4 ports (pipes) begin Flashing extensively in both the ROUTER C and ROUTER B in and lose the connection on both routers. I do PING and gives "timeout" for both.

 

[ngrego]

That's odd! It may be sofware (like a firewall) causing the problem.

Have you tried using the "Any IP" setup? Basically Zyxel says that if you add the addresses and MACs of the other two routers in the "Any IP" list they will be able to connect to oneanother.