Power Needs?

Forum Audio : Audio Technology - Power Needs?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.tech (More info?)

 

What would be considered a minimally adequate power (in watts) needed
to power a typical ( 6" to 8", reasonably priced) ) in-ceiling
speaker??

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.tech (More info?)

 

mathedman wrote:

> What would be considered a minimally adequate power (in watts) needed
> to power a typical ( 6" to 8", reasonably priced) ) in-ceiling
> speaker??

IT depends. You talking a 70 volt system, or one with an amplifier
built
into the speaker box? Where is this speaker going? In an office or a
factory? Your best place is to go to the manufacturer's spec sheet for
the
speaker. Consult a local installer who can come and do a site visit.

--Dale

Reply to Anonymous

Archived from groups: rec.audio.tech (More info?)

 

"mathedman" wrote ...
> What would be considered a minimally adequate power
> (in watts) needed to power a typical ( 6" to 8", reasonably
> priced) ) in-ceiling speaker??

Ambient sound levels (dentist office vs. boiler factory?)
Ceiling height?
Speaker spacing?
Speaker sensitivity/efficiency?
Program material (voice paging vs. high-quality music?)
Distribution method (70V constant-voltage?)
"reasonably priced" = ???

Reply to Anonymous

Archived from groups: rec.audio.tech (More info?)

 

mathedman@hotmail.CUT.com (mathedman) wrote in message news:<416946da.73107122@netnews.worldnet.att.net>...
> What would be considered a minimally adequate power (in watts) needed
> to power a typical ( 6" to 8", reasonably priced) ) in-ceiling
> speaker??

Here is an answer just as informative as the question: Try 100 Watts
and if that isn't enough try something bigger.

Otherwise either post enough information or, better yet, check with a
local contractor who can assist you. You really need to have an idea
as to how much the speaker can handle, what impedances are you dealing
with, and how much power you need for your application. As bad as it
sounds, it really isn't a matter of just rolling your sleeves and
getting the right amp without planning it out some.

Dennis

Reply to Anonymous
Tom's Hardware > Forum > Audio > Audio Technology > Power Needs?
Go to:

There are 1246 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Content
They won a badge
Join us in greeting them