Geforce GTX 260 IS Runing but no display

[Quaqua]

Hey guys i recently purchased a nvidia geforce gtx 260 card to replace my integrated NVIDIA® GeForce 6100 / nForce 430 chipset however, when i switch the computer on it has no display. everything powers up including the video card but just seems to be no display. I have reseated the card and checked all connections are in and not loose but still no display.. can some one help me whit this please been trying to figure this out for 2 days now :
and i recently just put a new PSU 875W Intel AMD PC ATX Model number is KDM-X8875C


Computer Spec:

Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104-1431)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: M61PME-S2P
BIOS: Award Modular BIOS v6.00PG
Processor: AMD Athlon(tm) 7750 Dual-Core Processor (2 CPUs), ~2.7GHz
Memory: 2048MB RAM
Available OS Memory: 1984MB RAM
Page File: 1983MB used, 1984MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7601.17514 32bit Unicode
Display Devices

NVIDIA® GeForce 6100 / nForce 430 chipset
Memory
2 x 1.8V DDR2 DIMM sockets supporting up to 8GB of system memory (Note 1)
Dual channel memory architecture.
Support for DDR2 1066/800/667 MHz memory modules
Audio
Realtek ALC883 codec
High Definition Audio
2/4/5.1/7.1-channel (Note 2)
Support for S/PDIF In/Out
Support for CD In
LAN
RTL 8201CL chip (10/100 Mbit)
Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x PCI Express x1 slot
2 x PCI slots
Storage Interface NVIDIA® GeForce 6100 / nForce 430 chipset
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2 x SATA 3Gb/s connectors supporting up to 2 SATA 3Gb/s devices
Support for SATA RAID 0 and RAID 1
iTE IT8718 chip:
1 x floppy disk drive connector supporting up to 1
floppy disk drive
USB Integrated in the South Bridge
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1 24-pin ATX power connector
1 4-pin ATX 12V power connector
1 floppy connector
1 IDE connectors
2 SATA 3Gb/s connectors
1 CPU fan connector
1 system fan connector
1 front panel connector
1 front audio connector
1 x surround/center audio header
1 CD In connector
1 Power LED connector
2 USB 2.0/1.1 connectors for additional 4 USB 2.0/1.1 ports by cables
1 SPDIF Out connector
1 Chassis Intrusion connector
Back Panel Connectors
1 PS/2 keyboard port
1 PS/2 mouse port
1 parallel port
1 x serial port
1 x D-Sub port
1 COMA port
1 VGA port
4 USB 2.0/1.1 ports
1 RJ-45 port
3 audio jacks (Line In / Line Out / MIC In)
I/O Controller
iTE IT8718 chip
H/W Monitoring
System voltage detection
CPU / System temperature detection
CPU / System fan speed detection
CPU / System warning temperature
CPU / System fan failure warning
CPU fan speed control (Note 3)
BIOS
2 x 8 Mbit flash
Use of licensed AWARD BIOS
Support for DualBIOSTM
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Other Features
Supports @BIOS
Supports Download Center
Supports Q-Flash
Support for Virtual Dual BIOS
Supports EasyTune(Note 4)
Supports Xpress Install
Supports Xpress Recovery2
Operating System :windows 7 ultimate
Micro ATX form factor; 24.4cm x 22.5cm

 

[haider95]

Go into bios, make sure video output is set to pci express and not to onboard. Install the card and run.. update your bios first. What Power supply are you running?

 

[Quaqua]

Go into bios, make sure video output is set to pci express and not to onboard. Install the card and run.. update your bios first. What Power supply are you running?

when i had put it on pci it was just a black screen nothing came up im useing a 875 Watt and i try updateing my bios but it wasnt working

 

[DiaSin]

May be a dumb question but did you move the monitor cable from the motherboard (Integrated GPU) to the GTX 260? All power connectors necessary for the card are connected to it?

 

[Quaqua]

May be a dumb question but did you move the monitor cable from the motherboard (Integrated GPU) to the GTX 260? All power connectors necessary for the card are connected to it?

yes i did i just updates my bios so now ima gonna retry and see if it would work now =\

 

[Quaqua]

but the Card is not showing up in Display adapter's it just showing my on-board Graphic card ..

 

[haider95]

Plug the card in. Then plug the display cable into the motherboards VGA port. If you get display then it's not a PSU problem.

 

[swifty_morgan]

you don't want pci. pci is pci, a different slot altogether.

choose PEG or auto..... what other options is there? don't forget to save the changes. ) ( F10 and then press "enter" )

cable is plugged into card?

 

[Quaqua]

you don't want pci. pci is pci, a different slot altogether.

choose PEG or auto..... what other options is there? don't forget to save the changes. ) ( F10 and then press "enter" )

cable is plugged into card?

But There PCI OnBoard VGA and PEG

Im not geting anything but i was searching do my power spupply need to have 38 Amps? czu it say 25a 25a 28a 28a 0.5a and 2.0a
If So do u thin it can Run ATI Radeon X1950PRO 256MB PCI Express Video Card


http://www.ebay.com/itm/2211869519 [...] 1423.l2649
Or fi i can a new power suppliu whit This one Run the card

http://www.ebay.com/itm/PoWork-RED [...] 6951952%26

 

[swifty_morgan]

did you choose PEG?

 

[Quaqua]

did you choose PEG?

Yup I did put it on peg but nothing happen I also notice when I put the card it it like reset the computer about 3 times then it will full turn on those his mean that some thing wrong whit card?

 

[swifty_morgan]

you have both 6pin connectors hooked to video card?

can you try the card in another pci-e slot?

did you try hooking the dvi cable to the other receptor on the back of the card?

 

[swifty_morgan]

can't really find a lot of information on the power supply. did see a price of $43. which imo it's a POS.

 

[Quaqua]

you have both 6pin connectors hooked to video card?

can you try the card in another pci-e slot?

did you try hooking the dvi cable to the other receptor on the back of the card?

My Mother Board only has 1 Slot i just need a good Grapihic Card that can Run Diablo 3 at least in nice seting and recommend one u no or a good Power supply that can run my Graphic card

 

[haider95]

You're trying to run a GTX260. On a frickin 375-400w power supply? There's your problem right there -.- get a xfx pro series 550w psu -______________-

 

[Quaqua]

You're trying to run a GTX260. On a frickin 375-400w power supply? There's your problem right there -.- get a xfx pro series 550w psu -______________-

so My Power supply is a 375 to 400 wat? It say 875w on it =\= Blahh

 

[haider95]

You mentioned it having 25 amps bro. That's like a 400w power supply See if you can borrow a PSU from someone and test it out. Oh and do not get the X1950 Pro whatever. There's a world of difference between the GTX260 and that card. The GTX260 is like 10x better

 

[Quaqua]

You mentioned it having 25 amps bro. That's like a 400w power supply See if you can borrow a PSU from someone and test it out. Oh and do not get the X1950 Pro whatever. There's a world of difference between the GTX260 and that card. The GTX260 is like 10x better

ye so i was told im saying up money to buy the power supply u told me to get now hopefully i can get it cheap lol

 

[Quaqua]

Haider Will This one Work to because there Arnt any more in stock http://www.ebay.com/itm/Solid-Gear-SDGR-550BR-550W-80-PLUS-Bronze-ATX12V-v2-3-EPS12V-v2-91-Power-/200848742909?pt=US_Power_Supplies&hash=item2ec38499fd

 

[haider95]

Oh crap. sorry for not replying any sooner. Next time send me a dm and i'll get back to that sooner. Avoid it if you can, its not a known brand and go with something like a corsair antec seasonic or xfx PSU