Ok, this is what I am trying to do, I want to run three Dell LCD monitors, my Dell D630 ran all three monitors using Startech VGA to USB 2.0 adapters. I know a laptop is not designed to do this. So I bought a used/referbished Dell Inspiron 530 to run all three and someday a fourth monitor.
Mother board: foxcom G33M02
Power Supply: Bestec model ATX 0300 D5WB 200-240V
Intel(r) Core (TM) Duo CPU E4500 @ 2.20GHz
Windows 7 Ultimate
I plugged one monitor to the output from what I can see is part of the mother board
I then connected the other two monitors using the VGA to USB startech 2.0
Only two monitor worked, one via orignal output and one through VGA to USB, the second VGA to USB did not work.
Asked questions locally and was told to install a video card.
Video card purchased - used: NVIDA GFroce 6 Series I believe 256MB it promted me to download lastest drivers, done.
Note: there is two outputs to the new/used NVIDA video card, if I unplug all monitors and just plug one monitor into the video card I get text and stuff on the screen in a pink color, I then unplug the monitor and plug it into the other output to the video card using an adpater and the display on the monitor is fine.
Still cannot get three monitors to work, however I plug one monitor into the new/used installed NVIDA video card using the adapter and then using the VGA to USA I can get two monitors to work.
The mother board monitor output for the monitor does not work at this point and time.
I shut down the computer and turned it back on, I unplugged all monitors, now the mortherboard monitor output is working and by using the VGA to USB I can get a second monitor to work, but nothing working from the video card.
There is this message at start up, Attention: Unsupported video configuration detection.
This computer has an add-in graphics card but the monitor cable is unplgged into the intergrated video connetor.
To attach the monitor cable to the add-in grpahics card shut down the computer/plug monitor cable into the add-in graphics card connector and turn on computer.
I did this but the the computer/motherboard monitor output does not work.