Homesupport cisco com guide me forum

I've had this router for several years and I just was told someone is using it to send spam e-mail. So how can I sent it up to be a securited router?
2 answers Last reply
More about homesupport cisco guide forum
  1. Step 1
    Turn on your computer and wait for the Windows OS to load. Open your Web browser.
    Step 2
    Type '' (without the quotation marks) in the browser search bar and then press the enter key. A pop-up box will emerge and ask for your username and password. Leave the username space clear and type 'admin' in the password field. Click 'OK'. If this fails to work, you can try 'admin' for username and 'Admin' for the password field.
    Step 3
    This will bring you to the Linksys set-up page. Select 'Wireless' on the displayed tabs and then 'Wireless Security'. You will be given two options in the security mode: WEP or WPA. WPA is preferable since it is more secure but it is also incompatible with the older versions of the router. You should opt to choose WEP in the meantime.
    Step 4
    Choose 128 bits 26 hex digits in WEP Encryption. Input a password in the Passphrase box and click on 'generate'. This will generate four entries with 26 digits each. Copy all these bits of information into a text document for these are the keys you will need to access the wireless router.
    Step 5
    Enter the first key’s (KEY 1) 26-digit password when the computer prompts you to enter the WEP key.
    Step 6
    Go back to your browser and repeat step number two. This time, however, you need to change the password, formerly 'admin' or 'Admin'. Click on the 'Administration' tab and enter a different password in the given field and save. This is the password you will use in the event that you need to reconfigure your router.
    Step 7
    If you have a relatively new version of a Linksys wireless router, you may opt for the WPA security mode instead of WEP. Choose 'WPA-Personal' and select 'TKIP' encryption. Type your chosen passphrase and '3600 seconds' for key renewal. Write down your password for future reference and then click on 'Save settings'.
Ask a new question

Read More

Configuration Routers Cisco Wireless Networking