Operating system

[jimmyjames_51]

Hello, just finish building my computer, everything is new, drive supply,graphic,memory,MB,i3 processor,, try to install W7 OS, and it does not start, what could be the problem?

 

[Guest]

What do you mean by not starting?, does the computer power up are you getting the no boot disk message on the screen?

 

[DelroyMonjo]

Go into the BIOS and set the Boot sequence to boot from the DVD drive first. Save and install. When you are satisfied that everything is OK you can go back and set it to boot from C: drive.

 

[jimmyjames_51]

Go into the BIOS and set the Boot sequence to boot from the DVD drive first. Save and install. When you are satisfied that everything is OK you can go back and set it to boot from C: drive.

thank you i will try it,

 

[jimmyjames_51]

What do you mean by not starting?, does the computer power up are you getting the no boot disk message on the screen?

computer powers up, just not loading W7, Thanks

 

[dalauder]

Does it boot to the DVD to let you setup the install?

Did you already install Windows, did that process complete correctly?

I'm assuming you're aware that the hard drive starts completely blank.

 

[DelroyMonjo]

Hehe. It's been 30 minutes. I bet he's installing Win right now.

 

[dalauder]

I guess the OP is gone forever.

 

[jimmyjames_51]

I try to install the OS W7 on BIOS, TRY DEL,F2,F10, ESC, still does not install W7, check all headers and cables on MB, all are ok, not sure whats going on, i do hear 1 beep when I power on computer, cannot see the BIOS open up,

using a monitor with a DVI Adapter, screen is blank

 

[jimmyjames_51]

Does it boot to the DVD to let you setup the install?

Did you already install Windows, did that process complete correctly?

I'm assuming you're aware that the hard drive starts completely blank.

still having same problem