Problem connecting SE T630 to 2 different PCs via BlueTooth

Archived from groups: alt.cellular.ericsson (More info?)

On Wed, 18 Aug 2004 14:16:05 +0100, Shevek
<shevekFOADSPAMMERS@FOADSPAMMERSmoldy.me.uk> wrote:

>All, hope someone can help!
>
>I am having some problems connecting my T630 to my home and work PCs.
>
>I have connected up fine at home (WinXP SP2 with the MS Stack) and all
>is working fine. The PC registers ok on the handset as NEO which is
>the BT name I gave it.
>
>When I come to connect it to my work PC (Win 2000 SP4 with the Jon's
>Guide installation of BT) it connects up OK but registers the PC as
>NEO as well, not ARCHITECT which is what I have set up the BT name as.
>
>If I connect to the Win2K machine it overwrites the NEO device as the
>Win2K machine and when I get home I have to delete the device and
>re-pair with NEO to get it to work.
>
>Am I doing something wrong? Is it possible to pair the phone with 2
>different PCs?
>

Think I may have just figured it! I am using the same BT dongle for
both PCs - so I guess it has the same device address irrelevant of
which PC it is connected to. Can anyone confirm this?

If this is the case, I guess I will have to re-pair it for each
machine....

Hmm or maybe buy another dongle....

--


Shevek

Get DigiGuide - a downloadable desktop PC TV and Radio Guide
http://getdigiguide.com/?p=1&r=31493

Archived from groups: alt.cellular.ericsson (More info?)

On Wed, 18 Aug 2004 16:16:38 +0200, fm <postmaster@127.0.0.1> wrote:

>Shevek wrote:
>> On Wed, 18 Aug 2004 14:16:05 +0100, Shevek
>> <shevekFOADSPAMMERS@FOADSPAMMERSmoldy.me.uk> wrote:
>>
>>
>>>All, hope someone can help!
>>>
>>>I am having some problems connecting my T630 to my home and work PCs.
>>>
>>>I have connected up fine at home (WinXP SP2 with the MS Stack) and all
>>>is working fine. The PC registers ok on the handset as NEO which is
>>>the BT name I gave it.
>>>
>>>When I come to connect it to my work PC (Win 2000 SP4 with the Jon's
>>>Guide installation of BT) it connects up OK but registers the PC as
>>>NEO as well, not ARCHITECT which is what I have set up the BT name as.
>>>
>>>If I connect to the Win2K machine it overwrites the NEO device as the
>>>Win2K machine and when I get home I have to delete the device and
>>>re-pair with NEO to get it to work.
>>>
>>>Am I doing something wrong? Is it possible to pair the phone with 2
>>>different PCs?
>>>
>>
>>
>> Think I may have just figured it! I am using the same BT dongle for
>> both PCs - so I guess it has the same device address irrelevant of
>> which PC it is connected to. Can anyone confirm this?
>>
>> If this is the case, I guess I will have to re-pair it for each
>> machine....
>>
>> Hmm or maybe buy another dongle....
>>
>You are right in your assumption.
>
>Before buying another dongle, you should set up both PC's with the same
>BT-name and BT PIN code. Then pair from both, and test if it is
>possible to fool the phone into using both PC's without re-pairing.

That's just far too clever ;-)

Good idea, I'll give it a go!


--


Shevek

Get DigiGuide - a downloadable desktop PC TV and Radio Guide
http://getdigiguide.com/?p=1&r=31493