Sign in with
Sign up | Sign in
Your question

<> HDTV MODEL 922

Last response: in Home Theatre Legacy
Share
Anonymous
December 18, 2004 11:50:35 AM

Archived from groups: alt.video.satellite.4dtv (More info?)

Don't know if I got a bad unit or what???....always looked
shitty right outta the box, compared to my old analog.....
can get analog channels with 82-92 signal strength, but
lots of "noise" in the picture...no digital channels at all!!!

I live in Orlando area....have a 10' dish, and just installed
a 15 degree LNB, to see if that would help....it didn't....

Any suggestions would be appreciated....I believe the
dish etc. is ok, cause the old analog receiver had a
great picture, rock solid all the time.....with the 922
every time I change satellites I have to repeak the
dish to get a viewable signal!!!!.....

More about : hdtv model 922

Anonymous
December 18, 2004 8:47:55 PM

Archived from groups: alt.video.satellite.4dtv (More info?)

There should be a braided uninsualted strand of wire in the actuator bundle. Connect
it to the ground lug on the 922 back panel and see if that helps.


"Dane Bramidge" <Dane@the_asylum> wrote in message
news:9ic8s0hjs1aftprs1jqdsjm4k3l0q5psig@4ax.com...
| Don't know if I got a bad unit or what???....always looked
| shitty right outta the box, compared to my old analog.....
| can get analog channels with 82-92 signal strength, but
| lots of "noise" in the picture...no digital channels at all!!!
|
| I live in Orlando area....have a 10' dish, and just installed
| a 15 degree LNB, to see if that would help....it didn't....
|
| Any suggestions would be appreciated....I believe the
| dish etc. is ok, cause the old analog receiver had a
| great picture, rock solid all the time.....with the 922
| every time I change satellites I have to repeak the
| dish to get a viewable signal!!!!.....
Anonymous
December 19, 2004 12:40:03 PM

Archived from groups: alt.video.satellite.4dtv (More info?)

Dane Bramidge wrote:
> Don't know if I got a bad unit or what???....always looked
> shitty right outta the box, compared to my old analog.....
> can get analog channels with 82-92 signal strength, but
> lots of "noise" in the picture...no digital channels at all!!!
>
> I live in Orlando area....have a 10' dish, and just installed
> a 15 degree LNB, to see if that would help....it didn't....
>
> Any suggestions would be appreciated....I believe the
> dish etc. is ok, cause the old analog receiver had a
> great picture, rock solid all the time.....with the 922
> every time I change satellites I have to repeak the
> dish to get a viewable signal!!!!.....

Did you set the skew correctly?
!