how do you clear limits

Archived from groups: alt.video.satellite.4dtv (More info?)

The only way I know to do something even close to that is to access a
so-called "hidden screen" menu that resets ALL the parameters to factory
defaults like it was when it was first taken out of the box.
MAKE SURE THIS IS WHAT YOU WANT TO DO,BECAUSE IT CANNOT BE UNDONE ONCE
IT IS USED.
I myself have never used it personally,but if you hit OPTIONS 6,7,7,8
and on line 7 you will see this "icon" for this feature to key it in by
remote.I hope this helps,and good luck.

Archived from groups: alt.video.satellite.4dtv (More info?)

The numbers in the limits menu will not change until the dish has reached the same
position as the count for the limit.


"wolf2" <wilfj@hotmail.com> wrote in message news:%0%8e.1066563$Xk.343744@pd7tw3no...
| setting up 920 I just received. This is used of course and I can get G5 but
| nothing past. I can't clear the limits which were set-up by the precious
| owner......is there an entry code for resetting the limits??
| . I can get to the menu but unable to reset the number counts. I can move
| the dish east and west in Picture adjustment.. but the limits don't change.
| help!! Thanks
|
|

Archived from groups: alt.video.satellite.4dtv (More info?)

Thanks fellows for your immediate response! I found the problem after
getting a few hours sleep.... being I connected the 5 volt wire to the
actuary, I have a Reed switch so it's not required . SO SIMPLE.
Now I'm having a problem with the V/H split One side is great excellent
pic, just can't get the H to lock in. I'm checking connections now. Thanks
again.
"DRLev" <fake@ddress.tv> wrote in message
news:Lf09e.19165$hu5.2587@tornado.texas.rr.com...
> The numbers in the limits menu will not change until the dish has reached
the same
> position as the count for the limit.
>
>
> "wolf2" <wilfj@hotmail.com> wrote in message
news:%0%8e.1066563$Xk.343744@pd7tw3no...
> | setting up 920 I just received. This is used of course and I can get G5
but
> | nothing past. I can't clear the limits which were set-up by the precious
> | owner......is there an entry code for resetting the limits??
> | . I can get to the menu but unable to reset the number counts. I can
move
> | the dish east and west in Picture adjustment.. but the limits don't
change.
> | help!! Thanks
> |
> |
>
>

Archived from groups: alt.video.satellite.4dtv (More info?)

Check that you have the right feedhorn and servo set in the dish
settings,too.

"wolf2" <wilfj@hotmail.com> wrote in message
news:BKm9e.1076000$Xk.657070@pd7tw3no...
> Thanks fellows for your immediate response! I found the problem after
> getting a few hours sleep.... being I connected the 5 volt wire to the
> actuary, I have a Reed switch so it's not required . SO SIMPLE.
> Now I'm having a problem with the V/H split One side is great excellent
> pic, just can't get the H to lock in. I'm checking connections now. Thanks
> again.
> "DRLev" <fake@ddress.tv> wrote in message
> news:Lf09e.19165$hu5.2587@tornado.texas.rr.com...
>> The numbers in the limits menu will not change until the dish has reached
> the same
>> position as the count for the limit.
>>
>>
>> "wolf2" <wilfj@hotmail.com> wrote in message
> news:%0%8e.1066563$Xk.343744@pd7tw3no...
>> | setting up 920 I just received. This is used of course and I can get G5
> but
>> | nothing past. I can't clear the limits which were set-up by the
>> precious
>> | owner......is there an entry code for resetting the limits??
>> | . I can get to the menu but unable to reset the number counts. I can
> move
>> | the dish east and west in Picture adjustment.. but the limits don't
> change.
>> | help!! Thanks
>> |
>> |
>>
>>
>
>