Connect 2 wireless routers

how are you planning to connect the Aztech to the TL? wired or wireless

are you trying to create a separate network or share devices and date connected to the Aztech with all other devices connected to the TL?

if you are planning to do it wired and share devices and data, set the Aztech up as an AP.

http://www.tomshardware.com/forum/36406-43-convert-wire...

TL is the main.
Aztech is secondary,

1. Connect your computer to Aztech only thru cable
2. Enter 192.168.1.1 in your net browser in the computer
3. Make factory reset of Aztech
4. Do not change any thing after factory reset
5. Do not go to steps of wizard, just go to wireless change it as you wish the SSID and PWD
6. Disconnect cables with Aztech
7. Make a restart of your Aztech
8. Make a restart of your computer (or if you don't want to diconnect the cable nor to restart your computer, goto CMD type "ipconfig /release" then enter type "ipconfig /renew" then enter
9. Plug the IN cable coming from TL into Aztech port no. 4 which acts like wan also.
10. Plug the cable between computer and Aztech in any other ports 1-3
11. Connect to Aztech wireless network if you have wireless laptop
12. It works and you will find that default gateway of your aztech has been changed automatically to TL default IP i.e. 192.168.0.1 you can check this by typing ipconfig in CMD