Tom's Hardware > Forum > Home Cinema Equipment > MPEG DVB > Does altitude help?

Does altitude help?

Forum Home Cinema Equipment : MPEG DVB - Does altitude help?

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

Hi,

I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
The "look angle" calculator says I'm -.4 below. Could my 5000 ft
elevation-location help? Is it usually possible to get signal from
these fringe locations--like 1 or 2 degrees elevation above horizon?
What's someone's technical evaluation in terms of dish size, lnb, etc.

Thanks,
Largo

Sponsored Links
Register or log in to remove.

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

On Fri, 24 Sep 2004 17:32:35 -0700, Largo <tryagain@fullBS.bad.lnk>
wrote:

>Hi,
>
>I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
>The "look angle" calculator says I'm -.4 below. Could my 5000 ft
>elevation-location help? Is it usually possible to get signal from
>these fringe locations--like 1 or 2 degrees elevation above horizon?
>What's someone's technical evaluation in terms of dish size, lnb, etc.


Seems to me the 5000 ft would help. I would whip out a 1.8 meter and
try it.
I get it here in South Florida if that helps., :)

Reply to Anonymous

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

Largo wrote:

> Hi,
>
> I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
> The "look angle" calculator says I'm -.4 below. Could my 5000 ft
> elevation-location help? Is it usually possible to get signal from
> these fringe locations--like 1 or 2 degrees elevation above horizon?
> What's someone's technical evaluation in terms of dish size, lnb, etc.
>
> Thanks,
> Largo

You also need to be within the beam's footprint. Are you?

Reply to Anonymous
- 0 +

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

On Sat, 25 Sep 2004 06:19:17 GMT, Zoyburg <rats@attib.com> wrote:

>Largo wrote:
>
>> Hi,
>>
>> I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
>> The "look angle" calculator says I'm -.4 below. Could my 5000 ft
>> elevation-location help? Is it usually possible to get signal from
>> these fringe locations--like 1 or 2 degrees elevation above horizon?
>> What's someone's technical evaluation in terms of dish size, lnb, etc.
>>
>> Thanks,
>> Largo
>
>You also need to be within the beam's footprint. Are you?

Yes, it appears I'd be inside a 45 DBW ring. What size dish would
this need?

Thank you.
Largo

Reply to Largo

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

"Largo" <tryagain@fullBS.bad.lnk> wrote in message
news:aqe9l0dppqbvgrt2p0nva08q07jp1u1o38@4ax.com...
> Hi,
>
> I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
> The "look angle" calculator says I'm -.4 below. Could my 5000 ft
> elevation-location help? Is it usually possible to get signal from
> these fringe locations--like 1 or 2 degrees elevation above horizon?
> What's someone's technical evaluation in terms of dish size, lnb, etc.
>
> Thanks,
> Largo

It would seem to me if you are below the horizon then you are below the
horizon and are beyond a "fringe" situation even at 5000 ft elevation.
However experiement! Get the largest dish you can and a standard or
universal lnb and go for it.

Reply to Anonymous

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

>> I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
>> The "look angle" calculator says I'm -.4 below. Could my 5000 ft
>> elevation-location help? Is it usually possible to get signal from
>> these fringe locations--like 1 or 2 degrees elevation above horizon?

no matter if you are at sea level or on top of a mountain your latitude and
longitude still remains constant. Even if you were able to "look" at those
satellites over the horizon, the footprint beam would probably be diminished
and none existant by the distance alone and the signal would probably be very
weak.

Reply to Anonymous
- 0 +

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

On 01 Oct 2004 23:50:03 GMT, piecheech@aol.com (PieCheech) wrote:

>>> I wondered about receiving KU FTA off Hispasat 1C from SE Arizona, US.
>>> The "look angle" calculator says I'm -.4 below. Could my 5000 ft
>>> elevation-location help? Is it usually possible to get signal from
>>> these fringe locations--like 1 or 2 degrees elevation above horizon?
>
>no matter if you are at sea level or on top of a mountain your latitude and
>longitude still remains constant. Even if you were able to "look" at those
>satellites over the horizon, the footprint beam would probably be diminished
>and none existant by the distance alone and the signal would probably be very
>weak.

I wanted to know the possibility of getting FTA off Hispasat. Lyngsat
for 30W "Hispasat" appears that I'd be able to "see it" although
Hispasat 1C footprint say's I won't.

My next question is about lyngsat. What's the difference between the
European and the American beam? I assume that if programming says
this or whatnot is on the European beam, I won't be able to receive
it--even if the satellite is easily visible from my ground station
because that signal (and programming) is spotted onto another
continent. Is this assumption correct?

Thanks for your assistance.
Largo

Reply to Largo

Archived from groups: alt.video.satellite.mpeg-dvb (More info?)

 

Largo wrote:
[...]
> I wanted to know the possibility of getting FTA off Hispasat. Lyngsat
> for 30W "Hispasat" appears that I'd be able to "see it" although
> Hispasat 1C footprint say's I won't.
>
> My next question is about lyngsat. What's the difference between the
> European and the American beam? I assume that if programming says
> this or whatnot is on the European beam, I won't be able to receive
> it--even if the satellite is easily visible from my ground station
> because that signal (and programming) is spotted onto another
> continent. Is this assumption correct?

Yes; you have to look at the footprint map of the appropriate beam.

Reply to Anonymous
Tom's Hardware > Forum > Home Cinema Equipment > MPEG DVB > Does altitude help?
Go to:

There are 1227 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them