repost : Kenwood power inputs HELP car amp (picture link)

Archived from groups: rec.audio.tech (More info?)

Need help with what is probably second hand knowledge for some of you
seasoned audiophiles.

I have a Kenwood amp (model# kac920), it has a plug for power input, I lost
the plug so I am going to solder right to the pins that are there but can't
figure out what pins are for what.

looks like this :
http://ca.pg.photos.yahoo.com/ph/r [...] .dir=/2a65

Thanks

Rob Z.

Archived from groups: rec.audio.tech (More info?)

"I. Care" <icare@whocares.com> wrote in message
news:MPG.1da2f221cfad909a9896cc@newsgroups.comcast.net...
> In article <26CdnURX962QTaXeRVn-hg@rogers.com>, rziniukNOSPAM@rogers.com
> says...
>> Need help with what is probably second hand knowledge for some of you
>> seasoned audiophiles.
>>
>> I have a Kenwood amp (model# kac920), it has a plug for power input, I
>> lost
>> the plug so I am going to solder right to the pins that are there but
>> can't
>> figure out what pins are for what.
>>
>> looks like this :
>> http://ca.pg.photos.yahoo.com/ph/r [...] .dir=/2a65
>>
>> Thanks
>>
>> Rob Z.
>>
>>
>>
> Kenwood doesn't sell them, or a car audio installer? Those guys usually
> know what each pin is for.
> also
> Have you tried posting your question on rec.audio.car?
> --
> I. Care
> Address fake until the SPAM goes away ;-}


Kenwood was of no help, never replied to any of my emails. I figured that
this group ( and rec.audio.misc, rec.audio.car) would have an installer,
somebody that would recognize this connector. no luck yet

Rob Z.

Archived from groups: rec.audio.tech (More info?)

"I. Care" <icare@whocares.com> wrote in message
news:MPG.1da339cd9c21988c9896cd@newsgroups.comcast.net...
> In article <ws-dnbOclqCgE6TeRVn-jg@rogers.com>, rziniukNOSPAM@rogers.com
> says...
>>
>> "I. Care" <icare@whocares.com> wrote in message
>> news:MPG.1da2f221cfad909a9896cc@newsgroups.comcast.net...
>> > In article <26CdnURX962QTaXeRVn-hg@rogers.com>,
>> > rziniukNOSPAM@rogers.com
>> > says...
>> >> Need help with what is probably second hand knowledge for some of you
>> >> seasoned audiophiles.
>> >>
>> >> I have a Kenwood amp (model# kac920), it has a plug for power input, I
>> >> lost
>> >> the plug so I am going to solder right to the pins that are there but
>> >> can't
>> >> figure out what pins are for what.
>> >>
>> >> looks like this :
>> >> http://ca.pg.photos.yahoo.com/ph/r [...] .dir=/2a65
>> >>
>> >> Thanks
>> >>
>> >> Rob Z.
>> >>
>> >>
>> >>
>> > Kenwood doesn't sell them, or a car audio installer? Those guys
>> > usually
>> > know what each pin is for.
>> > also
>> > Have you tried posting your question on rec.audio.car?
>> > --
>> > I. Care
>> > Address fake until the SPAM goes away ;-}
>>
>>
>> Kenwood was of no help, never replied to any of my emails. I figured that
>> this group ( and rec.audio.misc, rec.audio.car) would have an installer,
>> somebody that would recognize this connector. no luck yet
>>
>> Rob Z.
>>
>>
>>
> Wasn't able to find anything for free, but if you are:
>
> Willing to spend $15 for full service manual?
>
> http://tinyurl.com/952nf
>
> Willing to spend $24 for the power cord
>
> http://tinyurl.com/76qc3
>
>
> --
> I. Care
> Address fake until the SPAM goes away ;-}


I Care,
you rock. I looked for hours all over the internet and couldn't find
anything, Thanks