Sign in with
Sign up | Sign in
Your question

Adding a subnet to a switch on different subnet

Last response: in Networking
Share
August 3, 2012 9:14:51 PM

OK I hope I describe this correctly. What I am trying to do is I have one switch with say a 10.1.9.1 sub-net I need to have one of the ports to be trucked with two vlans one for DSL and the other for a local connection with the sub-net of 10.1.5.1 both of the sub-nets are configured in the core as 9 and 5 so I have port 0 set up as a trunk and it is set up as ge-0/0/0.0 vlan_5, vlan_192 on the 10.1.9.1 subnet switch. The DSL is working but the local is not pulling a 10.1.5.1 IP and has no connectivity. Everything looks as if it is configured correctly but still the DSl is working but not the Local connection.
August 6, 2012 8:11:03 PM

Figured it out Never mind
m
0
l
August 16, 2012 11:53:54 AM

When adding a subnet to a switch of a different subnet not only does the change need to be made on the switch for the port to be used but it must also be made on the core configuration for the switch as well.
m
0
l
!