Tom's Hardware > Forum > Audio > Pro Audio > RNP output question: 1/4" TRS??

RNP output question: 1/4" TRS??

Forum Audio : Pro Audio - RNP output question: 1/4" TRS??

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

Archived from groups: rec.audio.pro (More info?)

 

I'm about to buy some cables, so I hope someone can answer this
question about the RNP preamp. I will be going from the RNP into an RME 9632
soundcard. The soundcard has two input options: 1/4" TR unbalanced or XLR
balanced.
I would prefer to use the XLR balanced input on the soundcard.
Looking at the back of the RNP, it says that the 1/4" output jack is TR. I
have read that the output can be run either with balanced or unbalanced
options. If I want to use the balanced option, can I use a 1/4" TRS cable
coming OUT of the RNP, with an XLR jack on the other end, going into the
soundcard? Will this maintain a true balanced signal? Thanks for your help!

Sponsored Links
Register or log in to remove.

Archived from groups: rec.audio.pro (More info?)

 

I'm happy to say that Mark from FMR Audio answered my question within
two hours (and on a Sunday morning)! Very impressive
I'm looking forward to getting my RNP's in use!

In case anyone else is wondering, the answer is, yes, you can use a
1/4" TRS to XLR cable for balanced outputs with the RNP.

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

"Hellenason7" <hellenason7@aol.com> wrote in message
news:20040808112816.23133.00002913@mb-m07.aol.com...
> I'm happy to say that Mark from FMR Audio answered my question
within
> two hours (and on a Sunday morning)! Very impressive
> I'm looking forward to getting my RNP's in use!
>
> In case anyone else is wondering, the answer is, yes, you can use
a
> 1/4" TRS to XLR cable for balanced outputs with the RNP.

My RNP survival kit that I carry with it is:
2 TRS to XLR-M 3ft cables with the appropiate ends.

2 TRS to TR adapters, make sure the tip on the unbalanced end connects to
both the tip and sleeve on the balanced end. You need this to monitor the
signal through the insert jack while recording.

2 TRS to TSR insert cables, for use with the RNC.

It's a very nice unit, but I'm really getting tired of using anything that
needs a wall-wart or non-standard cables, or non-standard mounting. Those
annoyances aside, the RNP is a great value that sounds great.

Sean

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

In article <20040808091418.26045.00001252@mb-m28.aol.com> hellenason7@aol.com writes:

> I would prefer to use the XLR balanced input on the soundcard.
> Looking at the back of the RNP, it says that the 1/4" output jack is TR.

The output jacks are balanced. It says T(+) R(-) It doesn't say
anything about S, but that's understood.

> If I want to use the balanced option, can I use a 1/4" TRS cable
> coming OUT of the RNP, with an XLR jack on the other end, going into the
> soundcard? Will this maintain a true balanced signal?

"RME 9632" is an incomplete model number. If you have the current
HDSP9632 and the optional XLR breakout cable, then yes, you can use a
cable that has a 1/4" TRS plug on one end and male XLR on the other.


--
I'm really Mike Rivers (mrivers@d-and-d.com)
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me here: double-m-eleven-double-zero at yahoo

Reply to Anonymous

Archived from groups: rec.audio.pro (More info?)

 

>"RME 9632" is an incomplete model number. If you have the current
>HDSP9632

Yes, that's the one.

>and the optional XLR breakout cable, then yes, you can use a
>cable that has a 1/4" TRS plug on one end and male XLR on the other.

Thanks again.

Reply to Anonymous
Tom's Hardware > Forum > Audio > Pro Audio > RNP output question: 1/4" TRS??
Go to:

There are 1115 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them
  • 01:00 vianescute won the Freshman badge
  • 01:00 meywd won the Freshman badge
  • 01:00 nayega won the Freshman badge
  • 01:00 gpfear won the Freshman badge
  • 01:00 Conrad925 won the Freshman badge
  • 01:00 skythra won the Freshman badge
  • 01:00 Ckaz won the Freshman badge
  • 01:00 james59 won the Uniformed badge
  • 01:00 snarl won the Uniformed badge
  • 01:00 patlabor44 won the Uniformed badge