Palm Tungsten and V600 via bluetooth for sms send recieve ..

Archived from groups: alt.cellular.motorola (More info?)

http://www.vxxxstuff.com
"Avanti" <martin.collins@btinternet.com> wrote in message news:<aA6_c.96802$a66.33170@fe2.news.blueyonder.co.uk>...
> You can download the lastest "Phone_Link_Update.zip" from PalmOne. the
> install the the driver for Motorola TP280i and the Standard GSM phone plus
> the Phone Link software itself into the palm.
>
> First bond your E398/V600 with the Tungsten T.
>
> Start the phone link from your palm first select the phone
>
> Click on the box under the Phone Connections:
>
> then Next
>
> Manufacturer: Motorola
> Model:TP280i
>
> then Next
>
> Via: Bluetooth
>
> (put your E398/V600 into BT findme mode)
>
> then Next
>
> If your phone displayed on the palm, select it
>
> then Next
>
> then Next again
>
> Enter the passkey, just any number say 0000
>
> On your phone say yes and put 0000
>
> then Next and Done
>
> the Click on the box under the network service:
>
> then next
>
> then next again if you are using the GPRS service
>
> Slelect the country and the ISP
>
> then next and done
>
> When you check the Preferences and connections you will found two entries
>
> One is with you E398/V600's BT name
>
> the other is LAN+your E398/V600's BT name
>
> and you also can found a entry for your ISP in the Perferences -> Network
> which is the same as the ISP you choose before and you can use this to
> connnect to the internet already.
>
> You can access the Internet via the E398/V600
>
> Then back to connection
>
> Create a entry
>
> Name BT to Motorola E398/V600
>
> Connect to Phone
> Via Blurtooth
> Device (your E398/V600's blue tooth name)
> Model Standard GSM
>
> then click details...
>
> put the speed 19200bps
> Init string E1&C1&D0X1S7=99+CMEE=1;+CSCS="GSM";V1
>
> then click okay then okay again,
>
> If the palm asked to use this phone as default, click yes.
>
> Then you can use the SMS and Dialer to access your phone.