Are you still out there Bill? I recently hijacked a sphere console
that was number three of three custom made consoles for spectrum
studios. It was headed for the dump (yikes!). I'm trying to track
down info for it to decide if I want to disassemble it for parts or
try to find someone that would like the whole console. I can't really
used the console as it is right now, too big & heavy to get into my
humble basement 'studio'. I did a search on the board here & you seem
to be knowledgable about the sphere consoles, so I hoped that you
could help me track down some info on this console or point me towards
someone that could. Or offer any advice on how to proceed with this.
phpixie <pulsjohn@hotmail.com> wrote:
>Are you still out there Bill? I recently hijacked a sphere console
>that was number three of three custom made consoles for spectrum
>studios. It was headed for the dump (yikes!). I'm trying to track
>down info for it to decide if I want to disassemble it for parts or
>try to find someone that would like the whole console. I can't really
>used the console as it is right now, too big & heavy to get into my
>humble basement 'studio'. I did a search on the board here & you seem
>to be knowledgable about the sphere consoles, so I hoped that you
>could help me track down some info on this console or point me towards
>someone that could. Or offer any advice on how to proceed with this.
Wow. I don't think Bill has posted here for almost ten years now. He
still pops up now and then but I don't think I have even seen him on
the Ampex list for a long time.
bilver.oau.org doesn't seem to resolve any more, but I know that was valid
as late as 1997. oau.org isn't even valid any more, it appears. You might
try www.switchboard.com and see if there is still a telephone number for
him in Winter Park, FL.
Man, that is a name from the past. He left pretty much when all of the
bozos started piling on the internet in the mid-nineties and the Eternal
September began.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Scott Dorsey wrote:
>
> Man, that is a name from the past. He left pretty much when all of the
> bozos started piling on the internet in the mid-nineties and the Eternal
> September began.
He wrote some of the early r.a.p posts that I thought were worth saving.
It would be good to know if he's still around.
>
> Wow. I don't think Bill has posted here for almost ten years now. He
> still pops up now and then but I don't think I have even seen him on
> the Ampex list for a long time.
>
> bilver.oau.org doesn't seem to resolve any more, but I know that was valid
> as late as 1997. oau.org isn't even valid any more, it appears. You might
> try www.switchboard.com and see if there is still a telephone number for
> him in Winter Park, FL.
>
> Man, that is a name from the past. He left pretty much when all of the
> bozos started piling on the internet in the mid-nineties and the Eternal
> September began.
> --scott
Thanx Scott, I'll give that a try & see what happens
phpixie <pulsjohn@hotmail.com> wrote:
>Thanx Scott, I'll give that a try & see what happens
GOT IT!
Registrant:
Vermillion Consulting (BILVER-DOM)
1390 Clay Street
Winter Park, FL 32789
US
Domain Name: BILVER.COM
Administrative Contact, Technical Contact:
Vermillion, Bill (BV223) bv@WJV.COM
Vermillion Consulting
1390 Clay St
Winter Park, FL 32789
US
407.647.1677
Record expires on 23-Jun-2005.
Record created on 24-Jun-1996.
Bulk whois optout: N
Database last updated on 15-Oct-2004 11:10:00 EDT.
Dan Kennedy knew someone from Sphere. You might ask him.
Cheers, Rick Novak.
James Perrett <James.R.Perrett@soc.soton.ac.uk> ...
> Scott Dorsey wrote:
> >
> > Man, that is a name from the past. He left pretty much when all of the
> > bozos started piling on the internet in the mid-nineties and the Eternal
> > September began.
>
> He wrote some of the early r.a.p posts that I thought were worth saving.
> It would be good to know if he's still around.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.